Bug fix
Description:
When two property lists are compared, the H5Pequal routine was just
comparing the raw information for the property values. This causes problems
when the raw information contains pointers to other information.
Solution:
Allow a 'compare' callback to be registered for properties, so that a user
application get perform the comparison itself, allowing for "deep" compares of
the property value.
This was exported to the H5Pregister & H5Pinsert routines in the development
branch, but not the release branch.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Purpose: Maintenance
Description: Fortran APIs MAC OS X port for IBM XL Fortran compiler
Solution: Brought back changes from 1.6 branch
Platforms tested: pommier, h5comittested; this time h5committest
complained about copperpp directory and didn't run;
tests on verbena and sol passed.
Misc. update:
Bug fix
Description:
Fix small memory leak of fill-value information inside the library.
Solution:
"reset" the fill-value object header message, so that the internal buffer
gets freed.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Bug fix
Description:
Range check the szip 'pixels per block' against the chunk size of the
dataset when attempting to create a new dataset, since the szip library
requires the PPB to be at least the size of the fastest changing dimension
in the chunk.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor for h5committest
Bug fix
Description:
Fixed bug in hyperslab iteration where certain combinations of flattened
and non-flattened dimensions would cause incorrect locations to be iterated
over.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Code cleanup, bug fixes
Description:
Wrap up rest of changes necessary for fixing the "short" MPI-I/O read
problem that Robb reported.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Bug fix
Description:
Attributes which were created with scalar dataspaces were reporting their
dataspace as a simple dataspace when queried later.
Solution:
Fix the dataspace handling code when reading in the attribute message from
the file to set the extent type correctly.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Bug fix.
Description:
Using a selection offset with hyperslab selections in chunked datasets
was getting into an infinite loop and hanging the application.
Solution:
Apply the selection offset to the hyperslab selection properly.
Platforms tested:
FreeBSD 4.9 (sleipnir) w & w/o parallel
h5committest
Bug fix
Description:
Make a copy of the index value for H5Giterate and use that instead of
dereferencing the index pointer.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to need h5committest
Bug fix
Description:
Variable length strings and sequences with NULL pointers were not handled
by library, causing problems access the data. This also affected fill values
for variable-length datatypes.
Solution:
Address the issues in the library by detecting NULL sequences/strings
and avoid trying to convert them.
Patched up dumper to display NULL sequences/strings.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Code optimization
Description:
Improved integer & floating-point datatype conversions by removing some
corner cases. Got rid of algorithm which walked the buffer of elements to
convert backwards, switching to algorithm which computes the non-overlapping
space in the buffer and repeatedly converts it in the forward direction.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Cray SV1 & T3E (T90 is not accessible)
Improvement
Description:
If the library is built in parallel mode, then name the "h5cc" and
"h5fc" programs "h5pcc" and "h5pfc" resp. This saves the user from
worrying about mixing serial and parallel builds of the library and
having to specify the pathnames and so-forth.
Platforms tested:
Linux (w/ parallel & Fortran)
Modi4 (w/ parallel & Fortran)
Sol (Serial & Fortran & C++)
Misc. update:
Updated release/docs/RELEASE
Bug fix & code cleanups
Description:
Change our use of MPI derived datatypes to not create datatypes with
"0-sized" lengths, which causes the LANL Q machine to hang.
Also, get rid of "prefer MPI derived datatypes" environment variable since
it has no advantage.
Platforms tested:
FreeBSD 4.9 (sleipnir) w & w/o parallel
h5committest
Description: new function H5Iget_file_id. It returns file ID given an obeject
(group, dataset, or attribute) ID.
Platforms tested: h5committest
Misc. update: RELEASE.txt
Bug fix
Description:
Single hyperslab selections (which were set with only one call to
H5Sselect_hyperslab) that had dimensions that could be "flattened" but were
interspersed with dimensions that could not be flattened were not correctly
handled, causing core dumps.
Solution:
Re-work "flattening" code to handle this case properly.
Platforms tested:
FreeBSD 4.9 (sleipnir) w/parallel
h5committest
Purpose: Bug fix
Description: Parameter rdcc_nelmts of the h5pget_cache_f subroutine
had wrong INTEGER(SIZE_T) instead of INTEGER type.
Solution: Fixed the type
Platforms tested: arabica in 64-bit mode (where INTEGER(SIZE_T) is not
the same as INTEGER)
Misc. update:
Bug fix
Description:
The 'char *' type is one of the "strongly" aligned types on Crays, but
a 'void *' is "weakly" aligned. So, assigning a 'void *' (pointing to a
location to place a 'char *') to a 'char **' can change the pointer value
during the assignment.
Solution:
Don't alias the 'void *' where the variable-length information ('char *'
or 'hvl_t') will go. Use a temporary variable on the stack to build up the
information about the VL string or sequence and then memcpy() the temporary
variable directly to the location pointed to with the 'void *'
Platforms tested:
FreeBSD 4.9 (sleipnir)
Cray SV1 (wind)
specific to Cray problems, h5committest not necessary.
Bug fix
Description:
When too many messages were inserted into an object header, the library
had an internal pointer to the "new message" that was pointing to the incorrect
location when the array of messages was re-allocated.
In the worst case, this could cause a file to be corrupted.
Solution:
Update the internal pointer when the array is re-allocated.
Platforms tested:
FreeBSD 4.9 (sleipnir)
Too small to require h5committest
Feature add
Description:
Add a few new fields to the H5G_stat_t structure, to allow more information
about the object header to be retrieved.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Add feature
Description:
Add H5Fget_freespace() routine, to check the amount of free space in a
file. This information is only valid until the file is closed currently,
however (until we start recording the free space information in the file
itself).
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Improved algorithm (bug fix, sorta)
Description:
The internal algorithm for adding new IDs in the ID manager code (H5I) was
adding new IDs to the front of the linked list and never adjusting the order
of the items on the list (unless an ID was deleted). If many new objects were
created, they would push earlier ones _way_ down the list (especially if the
objects were being leaked in the application, as they appear to be in the
current HDF-EOS5 library) and would cause O(n) search time for items on the
list.
The ID caching code in the ID manager was avoiding this behavior sometimes,
but it was adding IDs that were looked up to the very tail of the cache and
they would frequently leave the cache before helping.
Solution:
Implemented a "move to front" scheme for the linked list of IDs, which
improves the lookup situation for frequently accessed objects.
Removed ID caching code now, as the "move to front" algorithm actually
works better.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Bug/feature fix.
Description:
Relax restriction on parallel writing to compact datasets to allow partial
I/O.
Updates to reference manual mentioning the issues involved are delayed until
reference manual 'lock' is removed later this week.
Platforms tested:
FreeBSD 4.9 (sleipnir)
too minor to require h5committest
Bug fixes and code cleanup
Description:
Lots of changes here:
- Fixed bug #691 - when shared datatypes are used in attributes they
are incorrectly copied into the attribute instead of referring
the the named datatype in the file. This required bumping the
version of the attribute message. The new version of the attribute
message is only written out when a shared datatype is used in
the attribute. [Also, this format change made the size of the
attribute smaller.]
- Added information to attribute debugging routine so that shared
datatypes are displayed correctly with the h5debug tool.
- Refactored the H5O* routines to extract code that was common to
several routines into subroutines to call.
- Added 'link' method for H5O message sub-classes, which increments
the link count on shared objects when a message is created which
shares them.
- Corrected [unreported] bug where the link count was not being
decremented on the shared object when a object header message
with a reference to that object was deleted from the file.
- Reduced size of shared message from 49 bytes (which was incorrect
anyway and should have been 48 bytes) to 10 bytes, which required
bumping the version of "shared" messages.
- Refactored some of the shared datatype routines to allow for easier
queries of "committedness" internally to the library and also
added routine to easily increment/decrement the reference count of
a shared datatype.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Bug fix
Description:
The MPI_File_set_size() routine on ASCI Red is not able to extend files
so that they are larger than 2GB.
Solution:
Add an extra macro which controls whether MPI_File_set_size() can handle
>2GB offsets or if our "older" way of reading a byte, then writing a byte at
the appropriate offset should be used.
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
Code cleanup, etc.
Description:
Generalize Ray's datatype fixes to handle packing compound datatypes which
are the base type of an array or variable-length type, etc.
Also track "packedness" of a compound datatype from it's creation, instead
of only setting the 'packed' flag after the datatype was explicitly packed.
Updated docs to reflect that a compound datatype is allowed to grow (but
not shrink).
Platforms tested:
FreeBSD 4.9 (sleipnir)
h5committest
