Improve configure's large-file support control.
Description:
Modified configure to now attempt to add defines necessary for
supporting largefiles on all systems, instead of solely on linux. This
is in response to user requests to enable largefile support on Solaris
by default, as well as to give extra control on AIX (instead of just
jamming the necessary flag into the config files).
The old --enable-linux-lfs flag is being deprecated in favor of the
--enable-largefile flag (enabled by default), which can be used on all
platforms. --disable-linux-lfs can still be used to disable largefile
support (on linux) when the --enable-largefile flag is not specified.
On systems where large files cannot be supported in this manner,
configure will report as such.
Tested:
h5committest
AIX (NCSA's blue_print machine)
duty, liberty, and linew.
Bring r18650 from trunk to 1.8 branch:
Bring back various minor tweaks & cleanups from the revise_chunks
branch.
Tested on:
FreeBSD/32 6.3 (duty) in debug mode
Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
(h5committested on trunk)
Autotool Upgrade / Libtool Bug Fix
Description:
Updated autotools referenced in bin/reconfigure as follows:
Autoconf 2.64 --> Autoconf 2.65
Automake 1.11 --> Automake 1.11.1
Libtool 2.2.6a --> Libtool 2.2.6b-mcg
The referenced libtool version is a custom version of 2.2.6b. It
has been tweaked to fix a bug in libtool that occurs
when using PGI 10.0 compilers. A check incorrectly categorizes
the C++ compiler as version 1.0 instead of 10.0, and the link
line is subsequently set up incorrectly and fails to compile.
A patch has been made available and will be included in the next
release of libtool, but in the meantime I've applied the patch to a custom
installation as indicated above. This bin/reconfigure now references
the custom installation, and the resulting configure script will correctly
categorize the PGI 10.0 C++ compiler.
Ran bin/reconfigure to regenerate configure and makefiles.
Tested:
jam and amani with PGI 10.0 compilers.
h5committest
Bug1727 - NPOESS: h5copy should copy region references
Description:
Merged from hdf5 trunk r18447.
Tested and added test cases from previous checkin r18321
Reference Manual and tool's usage section for '-f ref' option is updated
for more comprehensibility.
Tested:
jam
add test cases for h5copy - copy external links with/without ‘–f ext’
option (relate to bug 1733)
Description:
merged from hdf5 trunk (r18398 and r18399)
Tested:
jam
Bug1727 - h5copy: add test cases for object and region references
Note:
merged from hdf5 trunk 18319 and 18320
File added:
tools/h5copy/testfiles/h5copy_ref.out.ls
tools/h5copy/testfiles/h5copy_ref.h5
Tested:
jam
The mixed use of RUNTEST (original) and RUNTESTS (new) caused
confusion. E.g., the timings in test/ was still using the old
$RUNTEST. It made more sense to use $RUNTEST which is used
by the dejagnu feature of automake. So, I changed all
$RUNTEST or $RUNTESTS to $RUNEXEC.
config/commence.am & config/conclude.am are the two files
that got changes. Also fixed an error in test/Makefile.am.
The rest are changed by bin/reconfigure.
Tested: h5committested.
===
The following patch to h5copy.c on or near line 173 makes the
tool substantially more useful...
*flag = (*flag) | fla;
Because the command-line option parsing permits multiple '-f' arguments,
this will have the effect of or'ing the flags together so one can do
someting like....
~/tmp/hdf5-1.8.1/tools/h5copy/h5copy -i multi_ucd3d.h5 -s block5 -o gorfo -d foo
-f shallow -f soft
Mark C. Miller, Lawrence Livermore National Laboratory
email: mailto:miller86@llnl.gov
===
Also fixed to exit failure if no command option is given.
Tested: Jam
Merge from Trunk
Description:
Merging all of my CFLAGS-related changes from trunk to 1.8
This includes revision #s: 17616, 17625, 17627, 17639, and 17643.
Tested:
h5committest and some additional checks on our FreeBSD as well
as NCSA's machines.
Merge from trunk
Description:
Merged revisions 17228 and 17440 from trunk to 1.8
Specifically, this brings support of --enable-static-exec flag into 1.8
Tested:
Manually on jam, linew, smirom, liberty, plus h5committest.
Currently, there is no automatic regression test that exists due to
portability issues. Behavior is both different and undefined on certain
systems (and while 'nm' command seems to exist on all machines, behavior
is confirmed to be different on Mac, possibly others). Solution will be
to set up some sort of framework in daily tests to build statically,
remove shared paths, and verify executables can function.
Updating autotools
Description:
Bring revisions 17345 and 17357 from trunk to 1.8, specifically:
- Automake upgraded to 1.11
- Autoconf upgraded to 2.64
- bin/reconfigure script edited to use new versions (on jam), and
run to generate new configure script and Makefile.in's.
- configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings
(in order to comply with new autoconf standard).
- bin/install-sh script replaced with new version as provided
by automake.
Tested:
- All issues on trunk were resolved, so only tested on jam and linew. Any
other outliers should be caught by daily tests.
Bring r17365 from trunk to 1.8 branch:
Final merge of changes from sblock_mdc branch back to trunk. The
superblock is now managed by the metadata cache.
Tested on:
FreeBSD/32 6.3 (duty) in debug mode
(h5committest performed on trunk)
- Updated bin/reconfigure to use latest version of automake (1.10.2).
Regenerated Makefile.in's by running bin/reconfigure.
- Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran
libraries.
Tested:
jam, liberty, smirom
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used to
spceify installation location of C header files, did not work correctly as
the path was hard-coded into config/commence.am. I'm presuming this is
because an older version of automake didn't know where to put C header
files. In any case, removing this line now defaults the includedir to the
same directory that it is currently hard-coded to, and also fixes the
configure flag which allows for customization of this value.
Tested:
jam, liberty
have 2 expected outputs for 2 h5ls runs depending if run on a big or little endian machine. Configure.in was modified to export a variable carrying endianess information to testh5ls.sh. This script then compares the current run with 2 expected outputs, one for a big-endian machine (linew was used to generate the output), other for little endian (jam was used to generate the output)
the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other
tested: jam, linew
Description: Libtool wasn't working on linew because the script was
not working with the Solaris Bourne shell. Libtool has built-
in detection to ensure that it uses an appropriate shell,
but our config/commence.am was hard coding this shell to be
/bin/sh. Removing this line allows the shell to be picked up
by configure, thus allowing libtool to use the correct shell
on linew (bash). This was initially added to correct for a problem
on an old machine (janus), so shoudn't be needed for machines
we currently support.
Tested: full make check install on kagiso and linew, compile only
on smirom, duty, and liberty.
Make the h5diff call compare only the source and destination objects, otherwise if we attempt to compare the all file, h5diff returns 1 for differences
Tested: linux
-This line, and those below, will be ignored--
M tools/h5copy/testh5copy.sh
Description:
1) configure now sets LD_LIBRARY_PATH before checking for presence of
SZIP encoder, so user does not need to set this. The path is then
saved and sent to Makefiles, and used when "make check-install" is
invoked, so user doesn't need to set this manually.
2) Upgraded libtool to version 2.2.6a
3) Rearranged tools build order as h5dump depends on existence of h5diff
and h5import. Since h5dump is a sister directory as opposed to a parent
of either, it doesn't know about the build rules of these tools, so
setting any sort of explicit dependency confuses automake as it won't
know how to build the tools. Instead, setting CONFIG = ordered forces
an in-order traversal of each tools subdirectory. (without it will also
traverse in order by default, but this should prevent gmake's -j option
from jumping ahead as well). 'make check install' should now be able to
be invoked after 'configure' without causing a dependency failure.
4) Removed H5_HAVE_LARGE_HSIZET macro from vms/src/h5pubconf.h, as this macro
has now been out of the code for some time. (vms pubconf needs to be
updated manually, which is why it was still hanging around).
Tested: kagiso, smirom, liberty
Note: h5diff looks to be causing failures in h5copy and h5dump tools tests,
though these were present before any of my changes. My changes only
affect build order and configuration setup, and shouldn't prevent
fixes for these failures coming in after this checkin. Other than these,
tests pass fine.
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso serial and h5committested (kagisopp, smirom, linew).
Improvement.
Description:
src/libhdf5.settings was the initial configure summary and is installed.
Then configure is changed to dump a summary of the configure settings to
the output and also append it to src/libhdf5.settings. That created
two different output formats and duplicated information. This is the
initial attempt to clean up this confusion and unify the output format.
It is decided to use the src/libhdf5.settings template as the unified means.
This requires more macros symbols be defined. The following symbols are
all related to generating the src/libhdf5.settings file.
AC_SUBST(EXTERNAL_FILTERS)
AC_SUBST(MPE) MPE=no
AC_SUBST(STATIC_EXEC) STATIC_EXEC=no
AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no
AC_SUBST(FC) HDF_FORTRAN=no
AC_SUBST(HDF_CXX) HDF_CXX=no
AC_SUBST(CXX) HDF_CXX=no
AC_SUBST(HDF5_HL) HDF5_HL=yes
AC_SUBST(GPFS) GPFS=no
AC_SUBST(LINUX_LFS) LINUX_LFS=no
AC_SUBST(INSTRUMENT) INSTRUMENT=no
AC_SUBST(CODESTACK) CODESTACK=no
AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no
AC_SUBST(DIRECT_VFD) DIRECT_VFD=no
AC_SUBST(THREADSAFE) THREADSAFE=no
AC_SUBST(STATIC_SHARED)
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a`
The src/libhdf5.settings.in has CONDITIONAL's added to it too. The
untrue conditions turned into a "#" and these lines are cleaned by the
post processing script.
Platform tested:
h5committest on kagiso, smirom and linew. (smirom had failures not due to
my changes.)
Description: Updated bin/reconfigure script to reflect the new versions of
libtool and automake in the /home1/packages/ directory.
Rearranged configure.in script. For some reason, when using
libtool 2.2, the libtool script doesn't generate until
later in the configuration process, so I had to move
a test that parsed through the libtool script to a point
after where it was actually being generated.
Ran libtoolize on the project, and ran bin/reconfigure to
regenerate configure and Makefile.in's throughout.
Tested: kagiso, smirom, linew, tg-login
Add work-around to allow reading files that were produced with a buggy
earlier version of the library, which could create objects with the wrong
object header message count. There is now a configure flag
"--enable-strict-format-checks" which triggers a failure on reading a file
with this sort of corruption (when enabled) and allows the object to be read
(when disabled). The default value for the "strict-format-checks" flag is
yes when the "debug" flag is enabled and no when the "debug" flag is disabled.
Note that if strict format checks are disabled (allowing objects with
this particular kind of corruption to be read) and the file is opened with
write access, the library will re-write the object header for the corrupt
object with the correct # of object header messages.
This closes bugzilla bug #1010.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Add H5Lvisit_by_name() API routine to library.
Eliminated all (five!) other group traversal routines and changed them
all to use the new API routine.
Cleaned up output of h5ls & h5stat:
- Issue error when requesting recursive traversal of a file
with the "group info" flag, but no group given
- Print info about root group in all(?) appropriate situations
- Don't print "verbose" information about root group until the
root group is in the list of objects to display
(mostly because h5ls & h5stat had a different twist on traversing the
groups in a file that the other utilities)
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Add API versioning to H5Tcommit()
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
AIX/32 5.3 (copper) w/FORTRAN, w/parallel, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Pursue calls to H5Gcreate() relentlessly and ruthlessly exterminate
them, leaving only a few tame specimens in text files and comments. ;-)
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Add --enable-deprecated-symbols configure option, to allow users to
remove deprecated public API symbols at configure time.
Add bin/make_vers script to bin/reconfigure actions.
Run bin/reconfigure to regenerate autotool components.
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
Linux/32 2.6 (kagiso)
2) Removing configuration of c++/src/H5cxx_pubconf.h file.
Reasoning: the additional pubconf file caused compilation complications, this is cleaner.
Tested: kagiso, smirom
Description: added new configuration to generate a pubconf file
in the c++/src directory, H5cxx_pubconf.h. When C++
compiler recognizes 'offsetof', the macro
H5_CXX_HAVE_OFFSETOF is defined in the new
pubconf file.
tested: kagiso, smirom
