Bring r26587 from trunk to 1.8 branch:
Bring r26489 from autotools_rework branch to trunk:
Remove the ULONG_TO_FP_BOTTOM_BIT_ACCURATE macro/define, as it was added
for SGI systems and old Solaris systems, which are no longer supported.
Tested on:
Linux/32 2.6.18 (jam) w/serial & parallel
(Daily tested on trunk for 2+ days)
412 lines
11 KiB
C
412 lines
11 KiB
C
#ifdef H5_FP_TO_INTEGER_OVERFLOW_WORKS_TEST
|
|
|
|
int main(void)
|
|
{
|
|
float f = 2147483648.0f;
|
|
int i;
|
|
|
|
i = (int)f;
|
|
|
|
done:
|
|
exit(0);
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_FP_TO_ULLONG_ACCURATE_TEST
|
|
|
|
int main(void)
|
|
{
|
|
float f = 111.60f;
|
|
double d = 222.55L;
|
|
unsigned long long l1 = (unsigned long long)f;
|
|
unsigned long long l2 = (unsigned long long)d;
|
|
int ret = 0;
|
|
|
|
if(l1 == 112)
|
|
ret = 1;
|
|
if(l2 == 223)
|
|
ret = 1;
|
|
|
|
done:
|
|
exit(ret);
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_FP_TO_ULLONG_RIGHT_MAXIMUM_TEST
|
|
int main(void)
|
|
{
|
|
float f = 9701917572145405952.00f;
|
|
double d1 = 9701917572145405952.00L;
|
|
long double d2 = 9701917572145405952.00L;
|
|
double d3 = 2e40L;
|
|
unsigned long long l1 = (unsigned long long)f;
|
|
unsigned long long l2 = (unsigned long long)d1;
|
|
unsigned long long l3 = (unsigned long long)d2;
|
|
unsigned long long l4;
|
|
unsigned long long l5 = 0x7fffffffffffffffULL;
|
|
int ret = 0;
|
|
|
|
if(l1 <= l5 || l2 <= l5 || l3 <= l5)
|
|
ret = 1;
|
|
|
|
l4 = (unsigned long long)d3;
|
|
if(l4 <= l5)
|
|
ret = 1;
|
|
|
|
done:
|
|
exit(ret);
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_LDOUBLE_TO_LONG_SPECIAL_TEST
|
|
|
|
int main(void)
|
|
{
|
|
long double ld = 20041683600089727.779961L;
|
|
long ll;
|
|
unsigned long ull;
|
|
unsigned char s[16];
|
|
unsigned char s2[8];
|
|
int ret = 1;
|
|
|
|
if(sizeof(long double) == 16 && sizeof(long) == 8) {
|
|
/*make sure the long double type has 16 bytes in size and
|
|
* 11 bits of exponent. If it is,
|
|
*the bit sequence should be like below. It's not
|
|
*a decent way to check but this info isn't available. */
|
|
memcpy(s, &ld, 16);
|
|
if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 &&
|
|
s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 &&
|
|
s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) {
|
|
|
|
/* Assign the hexadecimal value of long double type. */
|
|
s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3;
|
|
s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0;
|
|
s[8]=0xbf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c;
|
|
s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20;
|
|
|
|
memcpy(&ld, s, 16);
|
|
|
|
ll = (long)ld;
|
|
memcpy(s2, &ll, 8);
|
|
|
|
/* The library's algorithm converts it to 0x 00 47 33 ce 17 af 22 82
|
|
* and gets wrong value 20041683600089730 on the IBM Power6 Linux.
|
|
* But the IBM Power6 Linux converts it to 0x00 47 33 ce 17 af 22 7f
|
|
* and gets the correct value 20041683600089727. It uses some special
|
|
* algorithm. We're going to define the macro and skip the test until
|
|
* we can figure out how they do it. */
|
|
if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
|
|
s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
|
|
ret = 0;
|
|
|
|
ull = (unsigned long)ld;
|
|
memcpy(s2, &ull, 8);
|
|
|
|
/* The unsigned long is the same as signed long. */
|
|
if(s2[0]==0x00 && s2[1]==0x47 && s2[2]==0x33 && s2[3]==0xce &&
|
|
s2[4]==0x17 && s2[5]==0xaf && s2[6]==0x22 && s2[7]==0x7f)
|
|
ret = 0;
|
|
}
|
|
}
|
|
|
|
done:
|
|
exit(ret);
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_LONG_TO_LDOUBLE_SPECIAL_TEST
|
|
|
|
int main(void)
|
|
{
|
|
long double ld;
|
|
long ll;
|
|
unsigned long ull;
|
|
unsigned char s[16];
|
|
int flag=0, ret=1;
|
|
|
|
/*Determine if long double has 16 byte in size, 11 bit exponent, and
|
|
*the bias is 0x3ff */
|
|
if(sizeof(long double) == 16) {
|
|
ld = 1.0L;
|
|
memcpy(s, &ld, 16);
|
|
if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
|
|
s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00)
|
|
flag = 1;
|
|
}
|
|
|
|
if(flag==1 && sizeof(long)==8) {
|
|
ll = 0x003fffffffffffffL;
|
|
ld = (long double)ll;
|
|
memcpy(s, &ld, 16);
|
|
/* The library converts the value to 0x434fffffffffffff8000000000000000.
|
|
* In decimal it is 18014398509481982.000000, one value short of the original.
|
|
* The IBM Power6 Linux converts it to 0x4350000000000000bff0000000000000.
|
|
* The value is correct in decimal. It uses some special
|
|
* algorithm. We're going to define the macro and skip the test until
|
|
* we can figure out how they do it. */
|
|
if(s[0]==0x43 && s[1]==0x50 && s[2]==0x00 && s[3]==0x00 &&
|
|
s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
|
|
s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
|
|
s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
|
|
ret = 0;
|
|
}
|
|
if(flag==1 && sizeof(unsigned long)==8) {
|
|
ull = 0xffffffffffffffffUL;
|
|
ld = (long double)ull;
|
|
memcpy(s, &ld, 16);
|
|
/* Use a different value from signed long to test. The problem is the same
|
|
* for both long and unsigned long. The value is 18446744073709551615.
|
|
* The library converts the value to 0x43effffffffffffffe000000000000000.
|
|
* In decimal it's 18446744073709548544.000000, very different from the original.
|
|
* The IBM Power6 Linux converts it to 0x43f0000000000000bff0000000000000.
|
|
* The value is correct in decimal. It uses some special
|
|
* algorithm. We're going to define the macro and skip the test until
|
|
* we can figure out how they do it. */
|
|
if(s[0]==0x43 && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
|
|
s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00 &&
|
|
s[8]==0xbf && s[9]==0xf0 && s[10]==0x00 && s[11]==0x00 &&
|
|
s[12]==0x00 && s[13]==0x00 && s[14]==0x00 && s[15]==0x00)
|
|
ret = 0;
|
|
}
|
|
done:
|
|
exit(ret);
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_LDOUBLE_TO_LLONG_ACCURATE_TEST
|
|
int main(void)
|
|
{
|
|
long double ld = 20041683600089727.779961L;
|
|
long long ll;
|
|
unsigned long long ull;
|
|
unsigned char s[16];
|
|
int ret = 0;
|
|
|
|
if(sizeof(long double) == 16) {
|
|
/*make sure the long double type is the same as the failing type
|
|
*which has 16 bytes in size and 11 bits of exponent. If it is,
|
|
*the bit sequence should be like below. It's not
|
|
*a decent way to check but this info isn't available. */
|
|
memcpy(s, &ld, 16);
|
|
if(s[0]==0x43 && s[1]==0x51 && s[2]==0xcc && s[3]==0xf3 &&
|
|
s[4]==0x85 && s[5]==0xeb && s[6]==0xc8 && s[7]==0xa0 &&
|
|
s[8]==0xbf && s[9]==0xcc && s[10]==0x2a && s[11]==0x3c) {
|
|
|
|
/*slightly adjust the bit sequence (s[8]=0xdf). The converted
|
|
*values will go wild on Mac OS 10.4 and IRIX64 6.5.*/
|
|
s[0]=0x43; s[1]=0x51; s[2]=0xcc; s[3]=0xf3;
|
|
s[4]=0x85; s[5]=0xeb; s[6]=0xc8; s[7]=0xa0;
|
|
s[8]=0xdf; s[9]=0xcc; s[10]=0x2a; s[11]=0x3c;
|
|
s[12]=0x3d; s[13]=0x85; s[14]=0x56; s[15]=0x20;
|
|
|
|
memcpy(&ld, s, 16);
|
|
ll = (long long)ld;
|
|
ull = (unsigned long long)ld;
|
|
|
|
if(ll != 20041683600089728 || ull != 20041683600089728)
|
|
ret = 1;
|
|
}
|
|
}
|
|
done:
|
|
exit(ret);
|
|
}
|
|
#endif
|
|
|
|
#ifdef H5_LDOUBLE_TO_UINT_ACCURATE_TEST
|
|
int main(void)
|
|
{
|
|
long double ld = 2733248032.9183987530L;
|
|
unsigned int i;
|
|
int ret = 0;
|
|
|
|
i = (unsigned int)ld;
|
|
if(i!=2733248032 && i!=2733248031 && i!=2733248033)
|
|
ret = 1;
|
|
|
|
done:
|
|
exit(ret);
|
|
}
|
|
#endif
|
|
|
|
#ifdef H5_LLONG_TO_LDOUBLE_CORRECT_TEST
|
|
int main(void)
|
|
{
|
|
long double ld;
|
|
long long ll;
|
|
unsigned long long ull;
|
|
unsigned char s[16];
|
|
int flag=0, ret=0;
|
|
|
|
/*Determine if long double has 16 byte in size, 11 bit exponent, and
|
|
*the bias is 0x3ff */
|
|
if(sizeof(long double) == 16) {
|
|
ld = 1.0L;
|
|
memcpy(s, &ld, 16);
|
|
if(s[0]==0x3f && s[1]==0xf0 && s[2]==0x00 && s[3]==0x00 &&
|
|
s[4]==0x00 && s[5]==0x00 && s[6]==0x00 && s[7]==0x00)
|
|
flag = 1;
|
|
}
|
|
|
|
if(flag==1 && sizeof(long long)==8) {
|
|
ll = 0x01ffffffffffffffLL;
|
|
ld = (long double)ll;
|
|
memcpy(s, &ld, 16);
|
|
/*Check if the bit sequence is as supposed to be*/
|
|
if(s[0]!=0x43 || s[1]!=0x7f || s[2]!=0xff || s[3]!=0xff ||
|
|
s[4]!=0xff || s[5]!=0xff || s[6]!=0xff || s[7]!=0xff ||
|
|
s[8]!=0xf0 || s[9]!=0x00 || s[10]!=0x00 || s[11]!=0x00)
|
|
ret = 1;
|
|
}
|
|
if(flag==1 && sizeof(unsigned long long)==8) {
|
|
ull = 0x01ffffffffffffffULL;
|
|
ld = (long double)ull;
|
|
memcpy(s, &ld, 16);
|
|
if(s[0]!=0x43 || s[1]!=0x7f || s[2]!=0xff || s[3]!=0xff ||
|
|
s[4]!=0xff || s[5]!=0xff || s[6]!=0xff || s[7]!=0xff ||
|
|
s[8]!=0xf0 || s[9]!=0x00 || s[10]!=0x00 || s[11]!=0x00)
|
|
ret = 1;
|
|
}
|
|
done:
|
|
exit(ret);
|
|
}
|
|
#endif
|
|
|
|
#ifdef H5_NO_ALIGNMENT_RESTRICTIONS_TEST
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
typedef struct {
|
|
size_t len;
|
|
void *p;
|
|
} hvl_t;
|
|
|
|
#ifdef FC_DUMMY_MAIN
|
|
#ifndef FC_DUMMY_MAIN_EQ_F77
|
|
# ifdef __cplusplus
|
|
extern "C"
|
|
# endif
|
|
int FC_DUMMY_MAIN()
|
|
{ return 1;}
|
|
#endif
|
|
#endif
|
|
int
|
|
main ()
|
|
{
|
|
|
|
char *chp = "beefs";
|
|
char **chpp = malloc (2 * sizeof (char *));
|
|
char **chpp2;
|
|
hvl_t vl = { 12345, (void *) chp };
|
|
hvl_t *vlp;
|
|
hvl_t *vlp2;
|
|
|
|
memcpy ((void *) ((char *) chpp + 1), &chp, sizeof (char *));
|
|
chpp2 = (char **) ((char *) chpp + 1);
|
|
if (strcmp (*chpp2, chp)) {
|
|
free (chpp);
|
|
return 1;
|
|
}
|
|
free (chpp);
|
|
|
|
vlp = malloc (2 * sizeof (hvl_t));
|
|
memcpy ((void *) ((char *) vlp + 1), &vl, sizeof (hvl_t));
|
|
vlp2 = (hvl_t *) ((char *) vlp + 1);
|
|
if (vlp2->len != vl.len || vlp2->p != vl.p) {
|
|
free (vlp);
|
|
return 1;
|
|
}
|
|
free (vlp);
|
|
|
|
;
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef H5_ULLONG_TO_LDOUBLE_PRECISION_TEST
|
|
|
|
#include <stddef.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
int main(void)
|
|
{
|
|
/* General variables */
|
|
int endian;
|
|
int tst_value = 1;
|
|
int ret = 0;
|
|
|
|
/* For FreeBSD */
|
|
unsigned long long l = 0xa601e80bda85fcefULL;
|
|
long double ld;
|
|
unsigned char *c1, *c2;
|
|
size_t size;
|
|
|
|
/* For Cygwin */
|
|
unsigned long long l_cyg = 0xfffffffffffffff0ULL;
|
|
long double ld_cyg;
|
|
unsigned char *c2_cyg;
|
|
size_t size_cyg;
|
|
|
|
|
|
/* Determine this system's endianess */
|
|
c1 = (unsigned char*)calloc(1, sizeof(int));
|
|
memcpy((void*)c1, &tst_value, sizeof(int));
|
|
if(c1[0]==1)
|
|
endian = 0; /* little endian */
|
|
else
|
|
endian = 1; /* big endian */
|
|
|
|
/* For FreeBSD */
|
|
size = sizeof(long double);
|
|
memset(&ld, 0, size);
|
|
ld = (long double)l;
|
|
|
|
c2 = (unsigned char*)calloc(1, size);
|
|
memcpy((void*)c2, &ld, size);
|
|
|
|
/* Test if the last 2 bytes of mantissa are lost. Mainly for FreeBSD on Intel
|
|
* architecture(sleipnir) where it happens. */
|
|
/*if(endian==0 && c2[0]==0 && c2[1]==0)*/ /*little endian*/
|
|
if(endian==0 && c2[0]==0) { /*little endian*/
|
|
ret = 1;
|
|
goto done;
|
|
}
|
|
|
|
/* For Cygwin */
|
|
size_cyg = sizeof(long double);
|
|
memset(&ld_cyg, 0, size);
|
|
ld_cyg = (long double)l_cyg;
|
|
|
|
c2_cyg = (unsigned char*)calloc(1, size_cyg);
|
|
memcpy((void*)c2_cyg, &ld_cyg, size_cyg);
|
|
|
|
/* Test if the last 4 bytes(roughly) of mantissa are rounded up. Mainly for Cygwin
|
|
* where the values like 0xffffffffffffffff, 0xfffffffffffffffe, ...,
|
|
* 0xfffffffffffff000 ... are rounded up as 0x0000403f8000000000000000
|
|
* instead of 0x0000403effffffffffffffff, 0x0000403efffffffffffffffe, ...,
|
|
* 0x0000403efffffffffffff000 ...
|
|
*/
|
|
if(endian==0 && c2_cyg[0]==0 && c2_cyg[1]==0 && c2_cyg[2]==0 && c2_cyg[3]==0)
|
|
ret = 1;
|
|
|
|
done:
|
|
if(c1)
|
|
free(c1);
|
|
if(c2)
|
|
free(c2);
|
|
if(c2_cyg)
|
|
free(c2_cyg);
|
|
exit(ret);
|
|
}
|
|
|
|
#endif
|
|
|