----------------------
./MANIFEST
./src/H5FDmulti.c [NEW]
./src/H5FDmulti.h [NEW]
./src/Makefile.in
./src/hdf5.h
The split driver was reimplemented as a more general "multi"
driver which is capable of splitting data into multiple files
like the family driver except the partioning is done by memory
usage type instead of address. The H5Pset_fapl_split()
function just calls H5Pset_fapl_multi() with arguments which
prepare to split the address space into two files: meta and
raw data.
This is the first version. I plan to allow the open() call to
relax a bit which would allow one to open an hdf5 file when
only the meta-data file is present. This would allow a very
large file to be split and stored on tape and the relatively
small meta file to be mirrored on disk to allow limited
browsing of the file (any request for raw data would fail).
./src/H5private.h
./src/H5F.c
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
Added the ability for a file driver to store information in
the superblock which would be needed if the file were opened
again later for reading. The format is driver-defined which
allows users to extend it however they like.
./doc/html/H5.format.html
Added information about the new driver information block of
the superblock. This is where file drivers store information
they need in order to reopen the file later.
./src/H5F.c
./src/H5Fprivate.h
./src/H5FD.c
./src/H5FDprivate.h
./src/H5FDpublic.h
./src/H5FDcore.c
./src/H5FDfamily.c
./src/H5FDmpio.c
./src/H5FDsec2.c
./src/H5Fistore.c
./src/H5R.c
The file access properties and the file access property list
were decoupled, which allows the property list to more cleanly
contain properties for various levels of the file and which
allows the property list to be modified more cleanly when
opening files.
./src/H5.c
./src/H5FDpublic.h
Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never
used.
./src/H5D.c
Changed the way we detect the MPIO driver in all these special
cases.
./src/H5F.c
./src/H5Rpublic.h
./test/tfile.c
The default file sizeof(offset) was changed to be a function
of haddr_t instead of hsize_t.
THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER
CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES!
./src/H5F.c
Fixed an uninitialized memory access bug in file closing
related to the VFL.
./src/H5T.c
./src/H5Tpublic.h
Added an H5T_NATIVE_HADDR predefined datatype which
corresponds to the `haddr_t' type.
./test/Makefile.in
Reformatted long lines.
./test/big.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/external.c
Removed the H5F_ACC_DEBUG flag from file creation/open calls.
./test/big.c
Plugged a memory leak.
./test/h5test.c
Added support for the `multi' driver.
Removed #warning about not having the stdio driver. Plans are
to not implement it since the sec2 driver serves the same
purpose and testing didn't show any difference in execution
times between the two.
final parameter (so that VL datatypes have a way to pass in the custom memory
allocation routines).
Fixed a conversion bug when VL fields were part of a compound datatype that
was causing the no-op conversion routine to be used instead of the vlen routine.
Added the H5Pset_vlen_mem_manager and H5Pget_vlen_mem_manager routines to
allow users to provide their own custom memory allocation routines for VL data
read in from the file and reclaimed with H5Dvlen_reclaim.
Finished coding on H5Dvlen_reclaim so it works now.
Changes since 19990616
----------------------
./src/H5T.c
./src/H5Tconv.c
All conversion functions take an extra argument called
`stride' which is the number of bytes to advance the source
and destination pointers after each element is converted. If
the value is zero then the old behavior is preserved (source
and destination values are packed). This feature was necessary
to implement the compound datatype conversion optimizations
and it causes a minor change to the API (application-defined
type conversion functions take an extra size_t stride
argument).
./src/H5Tconv.c
An additional compound data type conversion function was added
which is applied unless the destination type is larger than
the source type. I'm measuring significant performance
increases for certain operations:
Test Name Struct-Conv Noop-Conv
New(Old) MB/s New(Old) MB/s
---------- ------------- -------------
Reordering 2.062(0.3936) 54087(0.9047)
Subsetting 2.901(0.6581) 40192(1.1100)
Shrinking 1.976(0.3925) 33628(1.1500)
---------- ------------- -------------
./test/dtypes.c
Added various compound datatype conversion tests.
Fixed return values from functions.
./src/H5T.c
Conversion timers are updated only if H5T debugging is turned
on a runtime (in addition to compile time). This allows the
data type layer to be compiled with debugging support without
having to pay a big runtime penalty if the debugging isn't
actually used.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added the stride argument to the H5T_convert() calls. The
stride is always zero, which means that the source and
destination data values are packed.
./configure.in
./configure [REGENERATED]
If API tracing is turned off then libhdf5.settings will say
`no' instead of nothing.
./test/flush1.c
./test/flush2.c
Added better error messages in a couple places.
Changes since 19990611
----------------------
./doc/html/H5.format.html
Added documentation for opaque data types (bitfield types were
already documented but they were out of order).
./src/H5E.c
Fixed a bug with glibc2 on linux systems where `stdout' is an
extern and can't be used to initialize static data.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
Removed the `_T' from the new C9x types I just added so the
names are consistent with existing types. Besides, the fact
that something is a datatype is obvious because it starts with
H5T_NATIVE_.
./tools/h5ls.c
Added the new C9x data types. H5ls prints one of these types
only if it doesn't match one of the builtin C types.
Prints the OID for shared data types.
Fixed a formatting bug with symbolic links which was
introduced a few changes ago.
The commandline has been changed so that objects from multiple
files can be listed with a single command. Instead of
specifying a file name and an optional list of objects, each
thing to print is a file name and object concatenated. H5ls
figures out how to devide the name into a file name and object
name even when the file name part doesn't correspond to an
actual Unix file.
Old syntax: h5ls [OPTIONS] FILE [OBJECTS]
New syntax: h5ls [OPTIONS] FILE[/OBJECT] [FILE[/OBJECT]]...
Example ({X,Y} is expanded by the shell)
Old command: h5ls -d ../test/x.data dir1 dir2
New command: h5ls -d ../test/x.data/{dir1,dir2}
The filename is printed as part of the object name when full
names are requested (--full or --recursive). If people really
don't like this they can undefine a constant at the top of
h5ls.
Errors from the hdf5 library are turned off.
Commandline switches of the form `--width 80' are accepted in
addition to `--width=80'. This is more symmetric with
single-letter switches that take two forms: `-w 80' and
`-w80'.
./src/H5D.c
Added tracing instrumentation for H5Dvlen_reclaim().
./src/H5private.h
Added casts to int for the isalpha() et al macros to shut up
solaris warnings about char subscripts.
----------------------
./configure.in
./configure [REGENERATED]
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5config.h.in [REGENERATED]
./src/H5detect.c
./src/H5private.h
Added checks for the C9x integer types like int32_t,
int_least32_t, and int_fast32_t and the unsigned
versions. HDF5 defines H5T_NATIVE_* versions (all caps) to be
the same as the type provided by the C library, otherwise it
defines them as integers exactly the specified size. Hardware
type conversion functions are used when the types
match some C-language type (like `int').
accessed with H5Tvlen_create, but I need to start writing tests now. Also the
more esoteric API calls (such as H5Tget_vlen_buf_size and the memory management
calls) aren't implemented yet.
----------------------
Remove changes from CVS
./bin/release
Added a `--nocheck' switch which causes the script to not
check the contents of the MANIFEST file against CVS. This is
sometimes useful when you need to make a quick snapshot but
the MANIFEST file is not quite up to date.
./src/H5D.c
Removed warnings for unused variables
./src/H5Fprivate.h
Removed the WIN32 definition for `uint' and changed the data
type for `eof_written' from `uint' to `uintn'. Shouldn't this
really be `hbool_t'?
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./test/dtypes.c
./doc/html/H5.format.html
Added support for bitfields and opaque data types.
----------------------
./config/depend.in
Fixed automatic dependencies. We were storing dependencies for
*.o files instead of *.lo files after shared libraries were
added.
./config/gnu-flags
./config/linux-gnulibc1
Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from
the linux file to this file and caused it to depend on the CPU
name. This fixes one of Elena's bugs.
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gnode.c
./src/H5P.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Smpio.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Tpublic.h
./test/istore.c
Added an H5Dget_storage_size() function that reports the
amount of storage allocated for raw data in a dataset.
Changed H5D_xfer_* to H5F_xfer_* because these properties are
more general than datasets. This also allows some of the
lower-level I/O functions to get this information easier.
./src/H5S.c
./src/H5Sall.c
Added two new functions H5S_all_read() and H5S_all_write()
which are optimizations that copy data directly between file
and memory without having to go through the scatter gather
step. This knocks quite a bit of time off the I/O and
reading/writing entire datasets is a fairly common operation.
./tools/h5ls.c
Reports the logical size of data, the allocated size of data,
and the percent utilization.
./MANIFEST
Removed old pablo files, added new files. Snapshots should now
start to work again.
./src/H5D.c
./src/H5Fmpio.c
Removed two warnings signed vs. unsigned comparisons and check
for overflow.
----------------------
./src/H5.c
Fixed more dependency problems in H5_term_library(). There was
a bug in the previous version that could cause the wrong EOF
marker to be written to the boot block under certain
circumstances. Hopefully this fixes it although I don't ready
access to a test case (Mark Miller will test it).
./src/H5F.c
./src/H5Fprivate.h
Added an H5F_close_all() that is similar to
H5F_term_interface() but which doesn't close the
interface. Files that don't have open object headers are
closed, others are delayed until all object headers close. All
files are flushed.
./src/H5ACprivate.h
./src/H5Bprivate.h
./src/H5Dprivate.h
./src/H5Eprivate.h
./src/H5Fprivate.h
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5HGprivate.h
./src/H5HLprivate.h
./src/H5Iprivate.h
./src/H5MFprivate.h
./src/H5MMprivate.h
./src/H5Oprivate.h
./src/H5Pprivate.h
./src/H5Ppublic.h
./src/H5RAprivate.h
./src/H5Sprivate.h
./src/H5Spublic.h
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5Vprivate.h
./src/H5Zprivate.h
./src/H5private.h
./src/H5public.h
Reindented after __DLL__ was added.
----------------------
./tools/h5tools.c
Strings are not converted to null-padding before being
printed; they are printed with whatever byte values appear in
the file.
./tools/h5ls.c
Now able to display attribute data type and data.
Added a `-f' or `--full' switch which causes the full name of
each object to be displayed instead of just the base name.
Added a `-r' or `--recursive' switch that recursively prints
the contents of groups, avoiding cycles.
More bulletproofing for non-printable characters in things
like object names, attribute names, and comment strings. We
don't want listing a file to send termal escape sequences
because it's sometimes possible to execute commands that way.
Since h5ls doesn't usually use quotes around object names we
must sometimes escape space characters.
External files are listed in a table to make the output less
confusing.
./tools/h5tools.c
./tools/h5tools.h
Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also
make h5dump_fixtype() public.
./test/dtypes.c
Wrote some data to an attribute to test h5ls attribute
printing.
./src/H5ACprivate.h
./src/H5Apublic.h
./src/H5Dprivate.h
./src/H5Dpublic.h
./src/H5Epublic.h
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Gprivate.h
./src/H5HLprivate.h
./src/H5Oprivate.h
./src/H5Ppublic.h
./src/H5RApublic.h
./src/H5Rpublic.h
./src/H5Spublic.h
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5Vprivate.h
./src/H5Zpublic.h
./src/H5private.h
./src/H5public.h
Reindented function prototypes after `HDF5API' was added. Also
rewrapped long lines.
./src/H5Flow.c
Added an `#ifdef WIN32' around an unused variable.
./src/H5api_adpt.h
Removed extra carriage returns inserted by "broken" operating
system.
./src/H5Dprivate.h
./src/H5Oprivate.h
./src/H5Vprivate.h
./src/H5private.h
Removed extraneous inclusion of H5api_adpt.h since it's
included in H5public.h which is included by everything.
./src/Makefile.in
Added H5api_adpt.h to the list of public header files to fix
broken `make install'.
----------------------
./src/H5.c
./src/H5private.h
Renamed `library_initialize_g' to `H5_libinit_g' to make it
conform to our naming scheme.
./src/H5I.c
Fixed a bug in H5I_dec_ref() that caused the return value to
always be zero instead of the new reference count.
./src/H5.c
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added support for enumeration data types.
./src/H5RA.c
Renamed H5T_insert() to H5T_struct_insert() and added
H5T_enum_insert().
./src/H5RA.c
./src/H5Shyper.c
Added casts to size_t for the third argument of memcpy() to
shut up a warning message from insure++.
./src/H5T.c
Changed "can't" to "unable to" in some error messages to be
more consistent.
./src/H5detect.c
If fork() or waitpid() are unavailable then we assume no
alignment constraints. Hopefully this is the case only on NT
and Intel CPU's don't have alignment constraints.
./src/H5public.h
Include <limits.h> because the H5T_NATIVE_CHAR macro needs the
definition for CHAR_MIN.
----------------------
./INSTALL
Added warning that enabling debugging code can adversely
affect performance even when the debugging isn't turned on at
run-time. Performance testing shows that under certain
circumstances (like data type conversions of compound types)
the H5_timer functions, although only a few lines each,
contribute a fairly large percent to the execution time.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Improved the H5Tunregister() function to make unregistering
more flexible. It takes the same arguments as H5Tregister()
but also accepts wild cards. All conversion functions that
match the H5Tunregister() search criteria are removed from the
global type conversion table.
The H5Tregister_hard() and H5Tregister_soft() were combined
into a single function called H5Tregister() which is the
counterpart to H5Tunregister(). A new `persistence' argument
was added to differentiate between the two types of conversion
functions.
The application is allowed to register a hard conversion
function for the no-op conversion path although the library
isn't obligated to call it (it usually does). This is mostly
for completeness, but the application might use it to help
determine if the raw data pipeline was able to use the
optimized path for the case when no type conversion is
necessary. The library doesn't allow this path to be
unregistered although the application can redefine it as often
as it likes.
Fixed the type conversion tables in preparation for MT-safety
and to fix previosly-known design bugs wrt. unregistering
conversion functions or changing the C function associated
with a conversion path. The MT-safety stuff is documented in a
separate white paper.
Increased the conversion function debugging name from 9
characters to 31 characters so the output can be more
descriptive.
Moved conversion path statistics from the H5T_cdata_t member
into the conversion path itself. This makes H5T_cdata_t
contain only application-visible data structures.
./src/H5A.c
./src/H5D.c
./src/H5Ofill.c
./src/H5P.c
./src/H5T.c
Improved the way type conversion functions are called so the
caller doesn't have to check for data type debugging and
increment type conversion timers and statistics.
Changed check for no-op conversion since it is now
application-definable and there may even be more than one
definition at a time in a multi-threaded application (one
thread might be using the no-op conversion path when some
other thread changes its definition -- the first thread still
sees the original defintion until it's done with the
operation).
./doc/html/Datatypes.html
Updated the user guide to reflect the changes to data type
conversion registration functions.
./bin/trace
./src/H5.c
Added tracing support for the new H5T_pers_t data type.
./test/dtypes.c
Added printf to display alignment value if non-aligned data
types are being tested.
./test/h5test.c
Modified the H5Tunregister() calls to use the new
arguments. All 94 of those calls can be replaced by a single
call to the new H5Tunregister() function.
./src/H5.c
Added HAVE_GETTIMEOFDAY around an auto variable and
initialized the elapsed time to zero when gettimeofday() is
not available.
./src/H5F.c
./src/H5Fprivate.h
./src/H5P.c
Added an H5*_init() functions which do the same thing as
H5*_init_interface() but can be called from other packages and
don't do anything if the interface is already initialized.
This fixes a couple memory leaks in applications that
repeatedly close and open the library with H5close().
./src/H5Tconv.c
Optimized some data alignment code in the hardware conversion
functions.
Hardware conversions accumulate statistics about source and
destination data alignment and print that information when the
conversion function is unregistered (usually when the
application exits) if data type debugging is compiled into the
library and enabled at run-time.
The conversion caching was cleaned up for the compound data
type conversion function. It now caches conversion paths in a
manner that will be MT-safe and is much simpler than the old
method. Also cleaned up some array index maps.
./src/H5detect.c
Fixd mispelling of alingemnt.
./src/H5private.h
Changed `TRUE' to `1' in assignment to interface_initialize_g
in FUNC_ENTER macro definition.
./tools/testh5dump.sh
Completely rewritten to make it shorter, better documented,
and conforming to most of the other test outputs.
The comparison of the actual output with the expected output
is insensitive to differences in white space. The test now
passes for the first time on Linux where the output width
wasn't as expected but the output was otherwise correct.
./tools/testfiles/tall-1.ddl
./tools/testfiles/tall-2.ddl
./tools/testfiles/tall-3.ddl
./tools/testfiles/tattr-1.ddl
./tools/testfiles/tattr-2.ddl
./tools/testfiles/tattr-3.ddl
./tools/testfiles/tattr-4.ddl
./tools/testfiles/tcomp-1.ddl
./tools/testfiles/tcomp-2.ddl
./tools/testfiles/tcomp-3.ddl
./tools/testfiles/tcomp-4.ddl
./tools/testfiles/tdset-1.ddl
./tools/testfiles/tdset-2.ddl
./tools/testfiles/tdset-3.ddl
./tools/testfiles/tdset-4.ddl
./tools/testfiles/tgroup-1.ddl
./tools/testfiles/tgroup-2.ddl
./tools/testfiles/tgroup-3.ddl
./tools/testfiles/tlink-1.ddl
./tools/testfiles/tlink-2.ddl
./tools/testfiles/tlink-3.ddl
./tools/testfiles/tlink-4.ddl
./tools/testfiles/tlink-5.ddl
./tools/testfiles/tslink-1.ddl
./tools/testfiles/tslink-2.ddl
Changed `../h5dump' to just `h5dump'.
./config/alpha-dec-osf4.0
Added more warning and optimization switches to the native
compiler.
----------------------
./doc/html/Datatypes.html
./src/H5.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
./test/chunk.c
./test/dtypes.c
./test/h5test.c
./test/mtime.c
./test/tattr.c
./test/th5s.c
./tools/h5dump.c
./tools/h5dumputil.c
./tools/h5import.c
./tools/h5ls.c
./tools/h5toh4.c
./tools/h5tools.c
Renamed the old H5T_NATIVE_CHAR type to H5T_NATIVE_SCHAR to
denote that it is always signed.
Added a new H5T_NATIVE_CHAR type which has the same range,
representation, and behavior as either H5T_NATIVE_SCHAR or
H5T_NATIVE_UCHAR depending on the compiler and its
command-line switches for the application source file which
references H5T_NATIVE_CHAR. If source files are compiled with
different switches then each source file will resolve
H5T_NATIVE_CHAR appropriately so it matches the C type `char'
in that source file.
NOTE: THERE ARE OTHER DOCUMENTATION FILES THAT I DIDN'T CHANGE
BECAUSE I CAN'T MODIFY THE SOURCE.
./test/extend.c
Swapped two lines to prevent diagnostic messages from messing
up the formatted output.
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
----------------------
./INSTALL.parallel [NEW]
We're beginning to unify some of the parallel installation
steps. This file will contain general information for
installing the parallel library. It's not complete yet.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Check for xdr_int() in libnsl required on Solaris when linking
with hdf4. It's found on the Irix system I tested which
complains that `-lnsl' didn't resolve any symbols. Oh well.
Fixed the order of searching for libdf and libmfhdf for hdf4
linking.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5Z.c
Check for compress() in libz in order to find older versions
of the library that will still work for hdf4. Added a
separate check for compress2() that hdf5 will use.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Sselect.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./test/bittests.c
./test/gheap.c
./test/hyperslab.c
./test/istore.c
./test/tmeta.c
./test/trefer.c
./test/tselect.c
./tools/h5debug.c
./tools/h5tols.c
Added checks for Posix.1g types like `int8_t'. If not defined
then H5private.h defines them. Changed all `int8' etc. to
`int8_t'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Z.c
Calling H5*_term_interface() resets interface_initialize_g to
FALSE so a subsequent call to H5open() (implied or explicit)
reinitializes global variables properly.
./src/H5private.h
./src/H5Oefl.c
./src/H5S.c
Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to
SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they
match the Posix.1 constants in <limits.h>.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5detect.c
Added 36 more integer hardware conversion functions to the
type conversion table for conversions to/from `long long' and
`unsigned long long'. The `long long' names will be changed
shortly to make them portable to Win32.
Changed H5T_init() to H5T_native_open() and added an
H5T_native_close() to open and close the predefined native
data types.
Increased the initial size of the type conversion table from
64 to 128 entries.
Reordered the 90 new integer conversion functions so the names
that are printed favor `int' over `short' or `long' when two
of them are the same.
./test/dtypes.c
Added hardware and software integer conversion tests for the
56 functions I added recently but not the additional 36
checked in this time. That will come next.
Call H5close() after each test so type conversion statistics
are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes
Added more debugging output for when things go wrong.
./src/H5private.h
Removed trailing carriage-returns inserted by broken operating
system ;-)
Fixed errors
H5.c
Fixed core dump with setvbuf() for debugging.
H5Fistore.c
Fixed bug with sparse datasets.
H5Omtime.c
Found a typo in "Posix Programmer's Guide". The `%z' in the
strftime() should be `%Z' instead.
H5T.c
H5Tpublic.h
Improved api tracing for H5Tinsert_array().
h5tools.c
Doesn't dump core for empty datasets.
----------------------
./src/H5.c
Fixed an argument promotion bug in HDfprintf()
./src/H5Fistore.c
Fixed a array bounds read error.
./src/H5HG.c
Fixed uninitialized (but unused) data appearing in the hdf5
file, a potential security problem.
./src/H5T.c
./src/H5Tpublic.h
Added new data types for hdf5 types: H5T_NATIVE_HSIZE,
H5T_NATIVE_HSSIZE, H5T_NATIVE_HERR, and H5T_NATIVE_HBOOL. I
did not add H5T_NATIVE_HID since I couldn't think of a reason
that it would be stored in a file anyway.
----------------------
./doc/html/Datatypes.html
./doc/html/H5.format.html
./src/H5.c
./src/H5Odtype.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./test/dtypes.c
Changed the values of the H5T_str_t type in order to make a
distinction between C's null terminated strings and strings
which are not null terminated.
The string character set and padding method are saved to the
hdf5 file instead of using defaults.
Added conversion function from one fixed-length string type
to another.
./test/chunk.c
Fixed to work with new filter API
----------------------
./bin/trace
./src/H5.c
Added tracing support for H5S_seloper_t and H5S_class_t.
./src/H5Sselect.c
./src/H5S.c
Added tracing statements that weren't inserted previously
because of formatting problems.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/cmpd_dset.c
Added H5Tinsert_array() for inserting an array member into a
compound data type. Added support to the struct conversion
function for member arrays. The index permutation is not
supported yet in the conversion (source and destination must
have the same permutations).
----------------------
./bin/trace
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5S.c
./src/H5T.c
Output-only arguments have their addresses printed during
tracing and added symbolic output for the H5F_driver_t
arguments. That's another reason that we should be careful to
add `/*out*/' after arguments that are output-only and
`/*in,out*/' after arguments that are used for both input and
output values.
No internal function calls H5Pget_class() anymore.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Added H5Tget_overflow() and H5Tset_overflow() so the
application can query or set a function that will be called
whenever an overflow occurs. Implemented as documented in
previous e-mail except the overflow handler gets two buffers:
one that contains the source value and one to receive the
optional destination value.
./test/dtypes.c
Tests overflow handler.
./src/H5.c
We have to declare fdopen() because I'm getting errors when
compiling on Irix64 even though we include <stdio.h> as
documented in the fdopen() man page.
----------------------
./html/Datatypes.html
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5detect.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/external.c
./test/tattr.c
./test/th5s.c
Organized the predefined data types.
./html/H5.intro.html
NO MODIFICATIONS! This file is a mess (obviously generated
from something else) so I skipped updating it!
./src/h5ls.c
./test/dsets.c
./test/tattr.c
./test/th5s.c
Added extra argument to H5Sget_dims() calls per Albert's last
update.
----------------------
THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles)
MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA
./MANIFEST
./src/H5Tbit.c NEW
./src/Makefile.in
Bit vector operations (not done yet)
./configure.in
Added -lm to the library list, needed by bit-vector operations
and conversion functions.
Removed vestiges of PARALLEL_SRC no longer used by the
makefiles. Albert came up with a better way (that actually
works :-)
./src/H5D.c
No code changes. Split a couple of long lines, refilled a
couple multi-line comments.
./src/H5T.c
./src/H5Tpublic.h
Fixed a bug reported by Jim Reus regarding conversion of
compound data types whose members require conversions which
are satisfied by as-yet unregistered soft conversion
functions.
Added H5T_IEEE architecture, but the funny-looking integer
types will be changed to H5T_BE_ and H5T_LE_ architectures
with the type names changed to match the H5T_NATIVE_ integers.
Added an H5Tconvert() but it hasn't been documented or tested
yet.
./src/H5Tconv.c
./src/H5Tpkg.h
Registered conversion functions integer->integer (a general
case) and integer->float (for a specific case). The
integer->integer conversion depends on the bitvector
operations which aren't finished yet and the int->float
conversion hasn't been retested since it was borrowed from
AIO. Don't look at them yet, they're ugly :-)
./src/H5detect.c
Fixed a typo which caused the msb_pad field of an atomic type
to not be initialized.
./test/dtypes.c
Added a test for number conversions but it's commented out
until the conversion stuff is truly working.
./src/H5D.c
./src/H5Tconv.c
./src/H5detect.c
Updated to work with new internal H5T functions. Fixed some
data type memory leaks during error recovery.
./src/H5Dprivate.h
Added H5D_typeof() similar to H5D_entof() that returns a
pointer directly to the dataset's type. This is used by
H5Tcopy() when invoked on a dataset (see below).
./src/H5Epublic.h
Fixed typos in H5E_BEGIN_TRY and H5E_END_TRY macros.
./src/H5F.c
Closing a file with objects still open reports the file name
in the warning message. Removed unnecessary invalidation of
shared data types.
./src/H5Gent.c
./src/H5Gpkg.h
./src/H5Gprivate.h
Added `const' to some arguments.
./src/H5O.c
./src/H5Oprivate.h
./src/H5Oshared.c
An object header message can now be a pointer to a message in
some other object header. The pointer is to the first message
of the appropriate type in the other object header and hard
link counts are maintained automatically to prevent dangling
pointers. The old global heap method of message sharing is
also supported although nothing actually uses it.
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Oshare.c
./src/H5Ostab.c
Changed the data type for the shared message info struct to
H5O_shared_t and added an extra initializer to the class
methods struct for the set_share method.
./src/H5Odtype.c
Added the ability to share data type messages by pointing to
other object headers.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added named data types and changed the functionality of some
API functions as follows:
* The term `read-only' means that a type handle cannot be
modified with functions like H5Tset_*() or H5Tinsert().
* The term `immutable' means the same as `read-only' with the
added restriction that H5Tclose() cannot be called for the
type. A transient type is made immutable by calling
H5Tlock().
* Handles to named types are always read-only.
* Handles to predefined types are immutable.
* A transient type can be converted to a named type by calling
H5Tcommit(). This function will fail if the type is already
named or is immutable.
* The API function H5Tcommitted() returns an indication of
whether a data type has been commited (or is named). If
H5Tcommitted() returns TRUE for a data type obtained by
calling H5Dget_type() on a dataset, then the dataset is
using a shared data type.
* H5Topen() returns a handle to a named type.
* H5Tcopy() always returns a handle to a modifiable transient
type even when invoked on a named type. Also, when invoked
on a dataset it returns a modifiable transient type which is
a copy of the dataset's data type.
* Using a named data type in the call to H5Dcreate() causes
the dataset object header to point to the named data type,
but using a transient type causes the type to be copied into
the dataset's object header.
* The data type returned from H5Dget_type() is a named data
type or a read-only transient data type depending on whether
the dataset points to a named data type. The old behavior,
to return a modifiable transient type, is accomplished by
overloading H5Tcopy() to operate on datasets (see above).
* H5Tshare(), H5Tunshare(), and H5Tis_shared() have been
removed from the API.
The following features were *not* implemented because they
need more discussion:
* A named data type can be opened by applying H5Topen() to a
dataset in which case the data type is the data type of the
dataset (or the data type to which the dataset points if the
dataset has a shared data type).
* A named data type can have attributes like groups or
datasets.
* The members of a compound data type can point to named data
types.
./src/h5ls.c
Reports `Data type' for named data type objects in the file.
----------------------
./html/Compression.html [NEW]
./html/Datasets.html
./html/H5.format.html
./html/H5.user.html
Documented compression. A couple of the H5P functions aren't
quite implemented yet but they're coming soon...
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5Farray.c
./src/H5Fistore.c
./src/H5Fprivate.h
./src/H5MF.c
./src/H5MFprivate.h
./src/H5O.c
./src/H5Ocomp.c [NEW]
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
./src/H5Sprivate.h
./src/H5Ssimp.c
./src/H5Z.c [NEW]
./src/H5Zprivate.h [NEW]
./src/H5Zpublic.h [NEW]
./src/Makefile.in
./src/hdf5.h
./test/dsets.c
./test/istore.c
Compression is now mostly working. Don't try to open a
compressed dataset though because the compression message
won't be read.
./html/Datatypes.html
./html/H5.api.html
./src/H5.c
./src/H5private.h
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Added timing support. When compiled with H5T_DEBUG defined
the library will print conversion bandwidths when the library
closes. The H5Tregister functions take a string as the first
argument so the statistics output is meaningful.
./MANIFEST
Added new files.
./configure.in
./src/H5config.h.in
Check for getrusage(). Check for compress2() in libz.a and
the zlib.h header file. Added `z' to the debug list.
./src/H5B.c
./src/H5Bprivate.h
./src/H5Gnode.c
./src/debug.c
Cleaned up some indentation and added support to print istore
B-trees. From the debugger, give the B-tree address and the
dimensionality from the layout message of the object header.
./src/h5ls.c
The oid is printed as w:x:y:z where w and x are the file ID
and y and z are the OID within the file. You can give z or
y*2^32+z as an argument to the debugger to print the object
header for the object.
./src/H5AC.c
Cleaned up statistics and made them match those reported by
H5T and H5Z.
./src/H5MM.c
./src/H5MMprivate.h
./src/H5Fistore.c
Finally got rid of a couple of long-standing const cast
warnings.
----------------------
./configure.in
Moved setting of compiler warning switches earlier in the file.
Turned on more warning switches to gcc.
./config/linux
Prints a warning if the gcc version is less than 2.8.1 since
that version has problems with register allocation for `long
long'.
./html/Datatypes.html
Documented sharing of data types between datasets.
./src/H5G.c
./src/H5Gpublic.h
Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard
links. Still have soft links to do.
./src/H5AC.c
./src/H5ACprivate.h
./src/H5D.c
./src/H5E.c
./src/H5Eprivate.h
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5G.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5HLprivate.h
./src/H5I.c
./src/H5Iprivate.h
./src/H5MM.c
./src/H5MMprivate.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5P.c
./src/H5S.c
./src/H5Ssimp.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5Vprivate.h
./src/H5detect.c
./src/h5ls.c
./test/cmpd_dset.c
./test/dsets.c
./test/external.c
./test/hyperslab.c
./test/iopipe.c
./test/istore.c
./test/shtype.c
./test/tstab.c
Fixed comparisons between signed and unsigned values. Fixed
warnings about unused function arguments.
----------------------
./MANIFEST
./test/Makefile.in
./test/shtype.c [NEW]
Added some tests for shared data types.
./configure.in
Removed MF and HL from the default debug list since. MF
because it hasn't been implemented yet and HL because it
produces lots of annoying messages about adjusting the size of
local heaps.
./src/H5F.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug with opening the same file twice. The first close
on the file_id incorrectly closed shared data structs.
Closing a file now correctly unshares data types that might be
pointing into that file.
./src/H5T.c
./src/H5Tpublic.h
Added an H5Tis_shared(). The caller supplies a file and a
data type and the function returns true if the data type is
currently marked for sharing in that file.
./src/H5AC.c
./src/H5F.c
./src/H5HL.c
./src/H5HG.c
./src/H5MF.c
./src/H5O.c
We now detect errors sooner when writing to a read-only
file. In the past, the error might not show up until the
cached item was flushed, and it was sometimes possible to not
even get an error!
./src/H5I.c
./src/H5Iprivate.h
If the search function fails then H5I_search() returns
failure. Also, the first argument for the search function
isn't const anymore because we might want the search to have
side effects (like calling H5T_unshare() for all shared data
types whose file just closed).
----------------------
./MANIFEST
./src/Makefile.in
./test/Makefile.in
Added new files.
./config/linux
./src/H5HL.c
./src/H5HLprivate.h
./src/H5MF.c
./src/H5MFprivate.h
Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list.
./html/H5.format.html
Updated shared object message information.
./src/H5D.c
Datasets can now share data types.
./src/H5F.c
Updated a comment that referred to H5ACC_WRITE.
./src/H5HG.c
./src/H5HGprivate.h
Moved a few things around. Made debugging better so you can
now give a collection address to ./src/debug and it shows some
useful stuff.
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c [NEW]
./src/H5Ostab.c
Supports shared messages.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
The H5Tshare() function allows the user to give the library
hints about how a data type will be used.
./test/shtype.c
Tests the H5Tshare() function.
./test/gheap.c
Tests the global heap.
./configure.in
./config/BlankForm [NEW]
./config/alpha-dec
./config/freebsd2.2.1
./config/hpux10.20
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
Cleaned up lots of configuration stuff and made the site
configuration files lots easier and more uniform. To make a
new file grab the BlankForm and modify it.
By default, debugging is turned on for most packages. Within
a package one can use `#ifdef H5AC_DEBUG' to wrap debugging
code. Other options are:
--enable-debug
--enable-debug=yes
The default, most but not all packages.
--disable-debug
--enable-debug=no
--enable-debug=none
The symbol NDEBUG is defined and none of the package
debug symbols.
--enable-debug=all
Debugging is turned on for all packages. This might
produce lots of output.
--enable-debug=g,d
Debugging is turned on for H5G and H5D.
A compile mode is also now supported
--enable-production
--enable-production=yes
The library is compiled with optimizations turned on.
The compiler flags are augmented by adding PROD_CFLAGS
and PROD_CPPFLAGS which are defined in the site config
file.
--disable-production
--enable-production=no
The default. The library is compiled for development
by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in
the site config file. This is usually just `-g'.
--enable-production=profile
--enable-production=pg
Builds a library for profiling by including the flags
from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the
site config file. This is usullay just `-pg' but it
could include optimization flags as well depending on
the type of profile one wants.
In summary, configure by saying `./configure' and you'll get a
development version of the library. Configure by saying
`./configure --enable-production --disable-debug' and you'll
get a production version with no debugging code.
----------------------
./src/H5D.c
./src/H5T.c
./src/H5Tprivate.h
Fixed a bug found by Kevin Powell regarding preservation of
existing data during a read or write when the source and
destination data types are the same. Thanks Kevin!
Fixed a couple warnings on Irix64.
./src/H5D.c
./src/H5Dprivate.h
./src/H5P.c
./src/H5Ppublic.c
./src/H5Tconv.c
./src/H5Tpublic.h
./test/cmpd_dset.c
The application can now turn on/off the part of the I/O
pipeline that deals with preservation of initialized data.
The default is off since this will be the usual case and
turning it on slows down the pipe. Use H5Pset_preserve() and
H5Pget_preserve().
./src/H5Fistore.c
Added an optimization for reading/writing a single chunk of
chunked storage.
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Osdspace.c
./src/H5Ostab.c
Fixed warnings reported by marek@iiasa.ac.at. Thanks Marek.
./src/H5Odtype.c
Fixed a failing assert() wrt reading compound types (not
present in hdf5-1.0.0a).
----------------------
./html/Dataspaces.html
./html/Errors.html
./html/Files.html
./html/H5.api.html
./html/review1.html
./src/H5private.h
./src/H5public.h
./test/dsets.c
./test/dtypes.c
Removed all the types like `int32' and `intn' into private
headers since they violate the naming scheme and pollute
application name space. Besides, our test files only use them
in a handful of places and it's probably useless to export
them to the app. The app is always written in terms of
standard numeric types or its own numeric types and probably
never in terms of HDF5 numeric types. If it were, then the
user would have to copy from their type to hdf5 type for
almost every hdf5 API function call! Same goes for return
values. I also removed SUCCEED/FAIL from the API since apps
should be checking against zero anyway.
if (FAIL==(space=H5Screate_simple(...))) /*wrong*/
if ((space=H5Fcreate_simple(...)<0)) /*right*/
./src/H5.c
Changed arguments of H5version() from `uintn' to `unsigned'.
./src/H5Tpublic.h
./src/H5T.c
Changed return type of H5Tget_nmembers() from `intn' to `int'
./src/H5A.c
./src/H5Aprivate.h
./src/H5Apublic.h
Changed `H5Asearch_func_t' to `H5A_search_func_t' and moved
its definition from the public to the private header file.
./html/H5.format.html
Documented changes made to the external file list (H5O_EFL)
message.
./src/H5D.c
./src/H5Dprivate.h
./src/H5E.c
./src/H5Epublic.h
./src/H5O.c
./src/H5Oefl.c
./src/H5Oprivate.h
./src/H5P.c
./src/H5Ppublic.h
Added partial support for external raw data files. HDF5 can
now describe external raw data files by listing the file
names, offsets, and size for a dataset. However, we will
restrict a dataset to be stored "contiguously" when the
external file list is viewed as a single address space. The
current implementation is unable to read/write to external
files--that will come later this week as will documentation.
For now, take a look at ./test/external.c, particularly the
calls to H5Pset_external().
./test/Makefile.in
./test/external.c [NEW]
./MANIFEST
Added tests for external storage. Note: the read test is
supposed to fail at this point since reading external datasets
is not implemented yet. There is no write test.
./src/H5S.c
./src/H5Sprivate.h
./src/H5Ssimp.c
Added H5S_get_npoints_max() to return the maximum possible
number of data points in a data space.
Added an extra argument to H5S_get_dims() which returns the
maximum dims.
./src/H5F.c
./src/H5Fprivate.h
./src/H5Fpublic.h
./src/H5M.c [DEPRICATED]
./src/H5Mpublic.h [DEPRICATED]
Changed `template' to `property list' in lots of places.
./src/H5Osdspace.c
Removed an extra `\n' from a print statement.
./src/H5S_public.h
Changed H5S_UNLIMITED to the maximum size_t value.
./test/extend.c
"Extendable" is spelled "extendible".
./src/H5Farray.c
./src/H5V.c
./src/H5Vprivate.h
./test/hyperslab.c
Strides are now type ssize_t instead of int. These have
nothing to do with the sample granularity arguments for
hyperslabs, which are also called "strides" in the code.
./test/tstab.c
Changed assumptions about default address and length sizes.
while he is visiting LLNL. I changed the default creation template
offset and length to 4. Will fix the problem later.
Changes since 19980205
----------------------
./src/H5H.c
./src/H5Hprivate.h
./src/H5O.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Olayout.c
./src/H5Oname.c
./src/H5Onull.c
./src/H5Oprivate.h
./src/H5Odspace.c
./src/H5Ostab.c
./src/debug.c
./html/H5.format.html
Added an extra 4-byte field after the heap magic number for
alignment on the DEC alpha. Changed object header message
alignment to 8-bytes.
./src/H5F.c
./src/H5Farray.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fstdio.c
./src/H5Gnode.c
./src/H5O.c
./src/H5Odtype.c
./src/H5P.c
./src/H5Pprivate.h
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
./src/H5V.c
./src/H5detect.c
./test/cmpd_dset.c
./test/dsets.c
./test/dtypes.c
./test/extend.c
./test/hyperslab.c
./test/istore.c
./test/th5p.c
./test/theap.c
Fixed a few irix64 warnings regarding size_t vs. int,
variables set but not used, printf formats
./config/irix64
Added `-woff 1196' to get rid of errors about __vfork() being
implicitly defined in a system header file.
./src/H5B.c
Fixed a stack alignment problem.
----------------------
./RELEASE
Added Library functions that I missed the first time.
./html/Datasets.html
Added an example for Elena's question about how to read a
single member of a compound data type so it becomes an array
of that member in memory.
./src/H5Pprivate.h
Fixed the prototype for H5P_get_hyperslab() to match the
definition.
./src/H5Psimp.c
Oops, added the kludge back in for the offset argument, which
is still an `intn' instead of a `size_t'.
./src/H5.c
./src/H5public.h
./src/H5F.c
./src/H5T.c
./src/H5Tpublic.h
Changed H5init() to H5open() and added an H5close() to fit our
create/open/close paradigm. The H5open() happens
automatically on the first call to the HDF5 library. The
H5close() happens automatically on exit() (unless the app
turns off that feature). H5close() closes all datasets and
files and releases all resources used by the library.
./test/dsets.c
Added calls to H5open() and H5close() to test them.
./test/dtypes.c
Removed call to H5init() since we no longer need it there.
./src/H5Fstdio.c
Changed the PABLO_MASK to the right value. Thanks Kim.
----------------------
./config/freebds2.2.1
./config/irix64
./config/linux
Added -DH5T_DEBUG to the debugging flags. Also changed `true'
to `:' for the Irix64 ranlib program. This turns on printing
of data type conversion statistics when the program exits.
./html/Datatypes.html
Fixed documentation for data conversion functions and updated
examples.
./src/H5D.c
The I/O pipeline updates data type conversion statistics.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tpublic.h
Cleaned up data type conversion registration interface.
----------------------
./Makefile.in
./config/commence.in
With GNU make you can now use `-j' and `-l' options and things
get built correctly. I can do a `make -j -l6 test' from a
clean hdf5 source tree (after configure) in 45 seconds (8 to
build dependencies, 26 to compile everything, and 11 to run
the tests).
./src/H5Gnode.c
Removed a comment that no longer applies.
./src/H5P.c
./src/H5Pprivate.h
./src/H5Ppublic.h
Changed H5Pselect_hyperslab() to H5Pset_hyperslab() and added
H5Pget_hyperslab() and H5P_get_hyperslab().
Replaced a couple short memset() calls with a for loop.
Removed `if (foo!=NULL)' from around H5MM_xfree() calls.
Clear hslab_def when the hyperslab disappears.
./src/H5Tpublic.h
Removed trailing enum comma.
----------------------
./src/H5D.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/cmpd_dset.c
Added support to turn background buffer on/off to help speed
up conversions. Currently, every type of conversion turns it
off except compound-->compound conversions which always turn
it on. In the future the compound-->compound conversions
might be more frugal.
----------------------
./MANIFEST
Added new files.
./src/H5D.c
Added support for partial datatype I/O which is needed when
merging struct members between file and disk. This isn't the
efficient version because the merge requires an extra gather
(step 1b in my pipeline diagram) that isn't turned off when it
isn't needed.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
Conversion functions take an extra argument which is a pointer
to a blob of private data that can be used by the conversion
function to save anything that's expensive to compute and
is constant for a particular conversion path.
./src/H5Tconv.c
Compound data type conversion is beginning to work! We can
handle conversions between compound types that have members
which are not arrays. It also supports partial conversion so
we can omit certain members of the source and not clobber
extra members in the destination.
./test/Makefile.in
./test/cmpd_dset.c [NEW]
Added a test case that demonstrates how to use compound data
types in a dataset. The output doesn't match the output of
the other test cases yet, the the entire example is more
readable and written entirely with the API.
----------------------
./src/*.h
Fixed indentation where indent(1) screwed up. This isn't by
any means the final say, but it's better than it was.
./src/H5A.c
./src/H5Aprivate.h
./src/H5Apublic.h
./src/H5C.c
./src/H5D.c
./src/H5E.c
./src/H5F.c
./src/H5G.c
./src/H5M.c
./src/H5P.c
./src/H5T.c
./src/H5Tconv.c
./src/debug.c
./test/dtypes.c
./test/istore.c
./test/theap.c
./test/tohdr.c
./test/tstab.c
Removed some atom functions from the API and made them
library-scope. Also changed some names by removing the
redundant `atom' from the name and by adding a `_' after the
`H5A'.
----------------------
./MANIFEST
./src/H5Dconv.c [REMOVED]
./src/H5Tconv.c [NEW]
./src/Makefile.in
Changed H5Dconv.c to H5Tconv.c
./html/Datatypes.html
Updated data type conversion section.
./html/H5.apiv2.html
Removed sections about datasets and data types since they're
covered in their own chapters.
./src/H5D.c
Supports data type conversion.
./src/H5Odtype.c
./src/H5Tpkg.h
Changed `lo_pad' and `hi_pad' to `lsb_pad' and `msb_pad'.
./src/H5T.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5Tpublic.h
./src/H5detect.c
Added predefined data types. Added query/set more
properties. Added type conversion infrastructure.
./test/dsets.c
Tests data type conversion during read.
----------------------
./html/Datatypes.html
Updated to match code.
./src/H5Odtype.c
./src/H5Oprivate.h
./src/H5Tpkg.h
./src/H5detect.c
Changed H5T_FIXED to H5T_INTEGER.
./src/H5T.c
./src/H5Tprivate.h
./src/H5Tpublic.h
./test/dtypes.c
Implemented lots of type properties.
./src/H5detect.c
./src/H5Tpublic.h
It is no longer necessary to call H5init() before using a
predefined data type.
Changes to error handling.
./src/H5B.c
Increased size of internal static buffers.
./src/H5C.c
Fixed syntax error when NDEBUG is defined.
./src/H5E.c
./src/H5Eprivate.h
./src/H5Epublic.h
Errors can now be printed with H5Eprint(). Other minor
changes to names and arg types.
./src/H5F.c
The base address is now stored in the boot block. The user
block size and the base address are synonyms.
./src/H5Fstdio.c
Fixed a bug with a return value from fseek().
./src/H5H.c
Added alignment constraints to get rid of unaligned access
errors on the DEC alpha having to do with the heap free list.
./src/H5P.c
./src/H5Ppublic.h
Changed some size arguments from int to size_t and fixed
memory allocation calls.
./src/H5T.c
./src/H5Tpublic.h
Changed the order of functions so all the public ones are at
the top of the file. Other minor changes.
./src/H5detect.c
Added a newline to a string constant.
