ISSUE : the tools use the following formula to read by hyperslabs: hyperslab_size[i] = MIN( dim_size[i], H5TOOLS_BUFSIZE / datum_size) where H5TOOLS_BUFSIZE is a constant defined of 1024K. This is OK as long as the datum_size does not exceed 1024K, otherwise we have a hyperslab size of 0 (since 1024K/(greater than 1024K) = 0). This affects h5dump. h5repack, h5diff
SOLUTION: add a check for a 0 size and define as 1 if so.
TEST FOR H5DUMP: Defined a case in the h5dump test generator program of such a type (an array type of doubles with a large array dimension, that was the case the user reported). Since the written file commited in svn would be around 1024K, opted for not writing the data (the part of the code where the hyperslab is defined is executed, since h5dump always reads the files). Defined a macro WRITE_ARRAY to enable such writing if needed. Added a run on the h5dump shell script. Added 2 new files to svn: tools/testfiles/tarray8.ddl, tools/testfiles/tarray8.h5. NOTE: while doing this I thought of adding this dataset case to an existing file, but that would add the large array output to those files (the ddls). The issue is that the file list is increasing.
TEST FOR H5DIFF: for h5diff the check for reading by hyperslabs is H5TOOLS_MALLOCSIZE (128 * H5TOOLS_BUFSIZE) or 128 Mb. This makes it not possible to add such a file to svn, so used the same method as h5dump (only write the dataset if WRITE_ARRAY is defined). As opposed to h5dump, the hyperslab code is NOT executed when the dataset is empty (dataset is not read). Added the new dataset to existing files and shell run (tools/h5diff/testfiles/h5diff_dset1.h5 and tools/h5diff/testfiles/h5diff_dset2.h5 and output in tools/h5diff/testfiles/h5diff_80.txt).
TEST FOR H5REPACK: similar issue as h5diff with the difference that the hyperslab code is run. Added a run to the shell script (with a filter, otherwise the code uses H5Ocopy).
tested: linux (h5commitest failed , apparently it did not detect the code changes in /tools/lib that fix the bug: the error in an assertion in the hyperslab of 0. I am sure that making h5ccomitest --distclean will detect the new code , but don't want to wait more 3 hours :-) )
Remove another call to H5E_clear_stack() from within the library.
Clean up lots of compiler warnings.
Tested on:
Mac OS X/32 10.5.6 (amazon)
(followup on other platforms forthcoming)
Description: Improved external link traversal of h5dump. h5dump will now
properly avoid all cycles, even those spanning multiple files. Improvement
to the output of committed datatypes. Committed datatypes are now checked
for uniqueness (like other objects). Tests added for these cases.
Tested: kagiso, linew, smirom (h5committest)
Description: Adds capability to h5ls to traverse external links when the -r
(recursive) option is given. Changes to the way absolute path names are patched
in h5trav.c. Changes to the way recursive traversal starting from a non-root
group is handled (which also fixes some preexisting issues). Tests added for
these cases.
Tested: kagiso, smirom, linew (h5committest)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Description:
As part of our Windows cleanup, we try to remove windows-specific tweaks in the source code. There are many instances where Windows code is introduces via ifdef's. We re-evaluate whether they are still required, and found that many of them are not. Others we change to "feature"-specific code, rather than Windows-specific.
Tested:
VS2005 on WinXP
VS.NET on WinXP
h5committest (kagisopp, smirom, linew)
The previous printing of
LINKCLASS 64
was removed
HDF5 "textlinksrc.h5" {
GROUP "/" {
EXTERNAL_LINK "ext_link1" {
TARGETFILE "textlinktar.h5"
TARGETPATH "dset"
DATASET "dset" {
DATATYPE H5T_STD_I32LE
DATASPACE SIMPLE { ( 6 ) / ( 6 ) }
DATA {
(0): 1, 2, 3, 4, 5, 6
}
}
}
}
}
There is no script test for this behavior so far, because test script uses complete paths that vary from test to test, making not possible to define a valid TARGETFILE in the file
tested: windows, linux, solaris
Usage is
-m T, --format=T
Where T - is a string containing the floating point format, e.g '%.3f'
The test consists of writing a number with 7 fractional digits (default precision display of %f is 6 digits) and have the 7 digits displayed with
-m %.7f fpformat.h5
Tested: windows, linux, solaris
Note: the output file was generated in linux, it may be possible that platforms other than the ones tested have a different representation of the number
Correct the prototype for H5Sselect_elements() to take an 'hsize_t *' for
the coordinates, instead of 'hsize_t **'.
Tested on:
Mac OS X/32 10.5.1 (amazon)
Change H5O[gs]et_comment to H5O[gs]et_comment_by_name and re-add simpler
forms of H5O[gs]et_comment.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Changed H5Acreate2 -> H5Acreate_by_name, to be more consistent with
other new API routines.
Re-added simpler form of H5Acreate2, which creates attributes directly
on an object.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Tarray_create() and H5Tget_array_dims() versioned, and drop the
"perm" parameter from the '2' versions.
Shift internal library usage to '2' versions.
Add simple regression tests for '1' versions.
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Make H5Pget_filter_by_id() API versioned and switch internal usage
to H5Pget_filter_by_id2().
Add simple regression test for H5Pget_filter_by_id1().
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
current behavior is
if DCPL has creation order tracked for attributes then sort the attributes by creation order otherwise by name
regarding sort order (ascending or descending) it is done in whatever is requested
tested: linux
Bug fixes
Avoid passing iteration flags on the dump_group function parameters but instead inspect the groups's property list just before calling H5Literate and H5Aiterate, in this later case checking the creation order flags with H5Pget_attr_creation_order
Tested: windows, linux
Put H5Acreate() under API versioning, with all internal usage shifted
to H5Acreate2().
Add regression tests for H5Acreate1().
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Added support for displaying several iteration orders on dataset attributes, 4 new tests in test script (name ascending, name descending, creation_order ascending, creation_order descending)
New h5 file is made on the generator program
Tested: windows, linux
first batch for displaying groups in creation order
1) Added extra parameter to dump_group of type H5_index_t , to be passed to H5Literate.
When a group is tried to be displayed, an inquiry of its creation properties is made. If H5P_CRT_ORDER_TRACKED is present on the group property list then the display is made by creation order, otherwise it is made by name
2) Added a new file to h5dumpgentest that generates a file with a hierarchy of groups with creation order on and off in alternately
Note : XML code was not modified
Tested : windows, linux
Add API versioning to H5Tcommit()
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
AIX/32 5.3 (copper) w/FORTRAN, w/parallel, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Remove all plain calls to H5Gopen() from source, replacing them with
either H5Gopen2().
Add test for H5Gopen1().
Reformatted several pieces of code, to clean them up.
Tested on:
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
Mac OS X/32 10.4.10 (amazon)
Pursue calls to H5Gcreate() relentlessly and ruthlessly exterminate
them, leaving only a few tame specimens in text files and comments. ;-)
Tested on:
Mac OS X/32 10.4.10 (amazon)
FreeBSD/32 6.2 (duty)
FreeBSD/64 6.2 (liberty)
Linux/32 2.6 (kagiso)
Linux/64 2.6 (smirom)
Solaris/32 5.10 (linew)
2 tests that were previously incorporated inside the array indices test file were separated from it. These are a test with a dataset with dimensions greater tan 4GB and a test to read by hyperslabs
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
Fix several bugs
1) the parsing of subsetting was using atoi to convert the parameter to an int, which caused problems for numbers greater that int. Substitute with atof
2) the printing of indices in the subsetting case was not being done. Solution: calculate the element position at the start of the subsetting using the algorythm
Given an index I(z,y,x) its position from the beginning of an array of sizes A(size_z, size_y,size_x) is given by
Position of I(z,y,x) = index_z * size_y * size_x
+ index_y * size_x
+ index_x
And pass that position to the function that dumps data, h5tools_dump_simple_data.
3) several index counters were declared as int, use hsize_t instead
4) modified the test generation program so that it includes test cases for subsetting of 1d, 2d, 3d, and 4d arrays and add these tests to the shell script
Take out separate memory type in the file for SOHM objects and create
aliases for existing memory types for SOHM use.
Tested on:
FreeBSD/32 4.11 (sleipnir)
This feature is still in progress; Shared Object Header Messages are not
complete as a feature and are not thoroughly tested. There are still
"TODO" comments in the code (comments with the word "JAMES" in them,
so as not to be confused with other TODO comments).
Hopefully this checkin will reduce the liklihood of conflicts as I finish
implementing this feature.
All current tests pass on juniper, copper (parallel), heping, kagiso, and mir.
h5dump bug 701. Symptom: The creation of a hardlink pointing to the root group "/" causes h5dump to display it as a link pointing to itself.
Cure: the root group was not being inserted in the table that keeps track of object names and links.
Added a test for this in the test generation program, the creation of a hardlink to the root
