-qmoddir=. because -qmoddir defaults to current directory already.
-static because it is not mentioned in "man xlf". Don't know it was a typo
or just an obsoleted option.
Removing both of them produced no ill or visible effects.
Tested: Up of LLNL
configure cleanup
Description
1. Removed check that disables shared libraries when pgcc is used. Apparently
they previously did not work with libtool 1.5.14 and on mir, neither of
which is in use anymore. Testing on jam and amani appear fine, so this
check is unnecessary.
2. Removed check that disables shared C++ libraries when -xarch is used to
enable 64 bit mode. We now use m64 flag to build 64 bit binaries, so
we shouldn't explicitly disable shared C++ libraries if -xarch is
discovered.
3. Removed old configure output summary section from configure.in, since
we now use the libhdf5.settings file.
4. Updated powerpc-ibm-aix5.x config file to once again put c99 flag into
H5_CFLAGS (and thus NOT get into h5cc), as decided in our dev meeting.
Tested:
h5committest
full build with pgcc on jam / amani
xlf90 and mpxlf90_r respectively. The fortran 90 compilers support
free format source files. This allows the removal of -k so that
the default compiler command is cleaner.
Tested: AIX Up at LLNL.
(Note: mpxlf90_r does not work but this could have been an undetected
old problem.)
Merge from Trunk
Description:
Merging all of my CFLAGS-related changes from trunk to 1.8
This includes revision #s: 17616, 17625, 17627, 17639, and 17643.
Tested:
h5committest and some additional checks on our FreeBSD as well
as NCSA's machines.
PathScale was mistaken as the Gcc compiler such that gcc flags were added
to it but PathScale did not honor many of them. (e.g. -Wvariadic-macros,
-Wold-style-definition, -Winit-self, -Wvariadic-macros, -Wmissing-include-dirs,
-Winit-self, -Wc++-compat)
Solution:
Added a pre-condition to detect pathScale compiler before Gcc is
accepted.
Tested:
Sandia Glory where PathScale compiler is available.
gfortran is more likely installed with gcc now.
Tested:
jam and amani which covers both linux and linux64.
No h5committest because this is gnu compiler specific, usually
applicable to Linux.
Merge these trunk revisions which occurred during the 1.8.3 release code
freeze back to the 1.8 branch:
From Quincey: 16845 16847 16849 16851 16858 16869 16897
From Ray: 16859 16880
From Allen: 16863
Tested on:
FreeBSD/32 6.3 (duty) in debug mode
FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (jam) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/Intel compilers w/default API=1.6.x,
w/C++ & FORTRAN, in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in debug mode
Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
Mac OS X/32 10.5.6 (amazon) in debug mode
Mac OS X/32 10.5.6 (amazon) w/C++ & FORTRAN, w/threadsafe,
in production mode
For gcc v4.3 and v4.4, with production mode,
if -O3 is used, H5Tinit.c would fail to compile. Actually bad H5Tinit.c is
produced.
If -O (same as -O1) is used, H5Tinit.c compiled okay but test/dt_arith
would fail with:
Testing hard normalized long double -> signed char conversions time: comm
and terminated abnormally
When -O0 (no optimizatio) is used, H5Tinit.c compilete okay and all tests
passed.
Solution:
Changed the config/gnu-flags to use -O0 for gcc v4.3 and 4.4 for production
flags for now so that build and tests would work. Still need to investigate
if the error is due to Gcc optimization bug or our code errors.
Tested:
In liberty with gcc43 and gcc44. Also, tested in jam and smirom with
older versions of gcc.
There are no gcc 43 or 44 compilers installed in other THG machines that
I know.
Bug Fix
Description:
Fixing BZ #1381. The --includedir=DIR configure option, which is used to
spceify installation location of C header files, did not work correctly as
the path was hard-coded into config/commence.am. I'm presuming this is
because an older version of automake didn't know where to put C header
files. In any case, removing this line now defaults the includedir to the
same directory that it is currently hard-coded to, and also fixes the
configure flag which allows for customization of this value.
Tested:
jam, liberty
a typo in a configuration file for Mac checked in on
October 31 (rev 16008). Since this change affects only Fortran
users on Mac Intel and doesn't affect daily tests on any platforms,
I am checking in the fix.
Platforms tested:
pahra with Intel compilers
Description: Libtool wasn't working on linew because the script was
not working with the Solaris Bourne shell. Libtool has built-
in detection to ensure that it uses an appropriate shell,
but our config/commence.am was hard coding this shell to be
/bin/sh. Removing this line allows the shell to be picked up
by configure, thus allowing libtool to use the correct shell
on linew (bash). This was initially added to correct for a problem
on an old machine (janus), so shoudn't be needed for machines
we currently support.
Tested: full make check install on kagiso and linew, compile only
on smirom, duty, and liberty.
Bring r15868 from trunk to 1.8 release branch:
Correct a minor error in file free space allocation which was affecting
the 'multi' VFD and preventing some tests from fully working with it.
Wholesale revisitation of all the places where tests were disabled
with various VFDs and remove or correct all these so that _only_ the tests
which _really_ can't work with particular VFDs are skipped during a
'make check-vfd' test.
Tested on:
Mac OS X/32 10.5.5 (amazon) in debug mode
Mac OS X/32 10.5.5 (amazon) w/C++ & FORTRAN, w/threadsafe,
in production mode
FreeBSD/32 6.3 (duty) in debug mode
FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/Intel compilers w/default API=1.6.x,
w/C++ & FORTRAN, in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
rank 0 in job 77 honest1.ncsa.uiuc.edu_60945 caused collective abort of all ranks
exit status of rank 0: killed by signal 9
Up to this point, we decide to turn off the use of advanced MPI derived datatype features inside HDF5 so that complicated selection tests are ensured to be handled by HDF5. This check-in reflects this.
Description:
The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the
Fortran API source so that conclude.am will give fortran api prefix in the
test output. The symbox HDF_FORTRAN is also used in configure for a different
purpose (indicated --enable-fortran). They conflicted.
Similar problem for the symbol HDF_CXX.
Solution:
Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is
a more appropriate name. Same for CXX_API.
Along the way, discovered that the Makefile.am of hl/fortran/test and
hl/cxx/test did not have those symbols at all. Added them in.
Platform tested:
Kagiso serial and h5committested (kagisopp, smirom, linew).
Description: config/lt_vers.am was updated as follows due to changes in API
since last version update:
LT_VERS_INTERFACE = 5
LT_VERS_REVISION = 0
LT_VERS_AGE = 0
Tested: kagiso
1. In H5Dwrite and H5Dread, let the data buffer point to a fake address if the application passes
in an empty buffer. This is mainly for MPIO programs that some processes may not have any
data to write or read but still participate the I/O. This solution solves some MPI's problem
like the ChaMPIon on tungsten which doesn't support empty buffer.
2. The ChaMPIon on tungsten doesn't support complex derived MPI data type correctly and collective
I/O when some processes don't have any data to write or read correctly. Detect the compiler
"cmpicc" in the system-specific config file and set the variables for these two cases to false.
The PHDF5 library already has set up a way to switch collective chunked I/O to independent
under these two cases.
3. A bug fix - During the work of the optimization for compound data I/O, the case for switching
collective chunked I/O to independent I/O was leftout. Fixed it by adding I/O caching to it in
H5D_multi_chunk_collective_io in H5Dmpio.c.
Tested on tungsten, cobalt, and kagiso for parallel; on linew and smirom for serial.
with Intel 10.0 compiler.
Solution: Use -O1 optimization flag with Intel 10.0
Platforms tested: abe and kagiso with Intel 10.0 and Intel 9.1 compilers; no committest
is needed since this is a compiler specific change.
Rename Mac OS X compiler configuration file to more generic name, which
should allow Intel Macs to configure better.
Tested on:
Mac OS X/32 10.4.10 (amazon)
QSC's mpi implementation does not do collection I/O correctly.
Need to turn some collective support off.
Tested platform:
LANL QSC.
-This line, and those below, will be ignored--
M config/dec-osf5.x
Straighten out some of the code for handling superblocks, in preparation
for revising the format of the latest version of the superblock before the
beta release.
Tested on:
Mac OS X/32 10.4.8 (amazon)
FreeBSD/32 6.2 (duty)
Description: Multiple copies of Copyright appeared in Makefile.in. This was
due to automake copying the copyright right in the included files such as
config/commence.am.
Solution: Automake treats double hashes as comments and does not copy them
to Makefile.in. Changed all the copyright notices in config/*.am to use
double hashes for the Copyright right notice.
Tested: kagiso via bin/reconfigure.
It seems that while Cygwin supports the time command, it has trouble with
the syntax
srcdir="../../hdf5/test" time ./testhdf5
and complains.
The solution is to test the above case in configure and not to use the time
command if it fails; Cygwin is fine with
srcdir="../../hdf5/test" ./testhdf5
Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility
problem since every platform but Cygwin is already fine with the current
syntax.
Change AIX to use C99 standard by default.
Also removed -DSTDC as its need is unknown.
Also added a line to identify this is for IBM AIX platforms.
Tested:
Copper.
Should disable linking against shared libraries in Fortran for compilers that
don't support shared libraries.
Should also fix problem when the wrong Fortran file extension was specified.
If these changes don't solve the Daily Test issues, I'll look at backing out
the autotool version change until I have time to fix them.
Tested on heping, kagiso, juniper.
For some reason, only Visual Studio DLLs complained about these.
Current code compiles for me under Visual Studio and generates no related
warnings on juniper.
Daily tests failed for Absoft f95 compiler
Solution:
Failure was due to several typos in H5f90prpto.h file; fixed
I also removed redundant flags from the configration files.
Platforms tested: heping with f95, g95, pgf90; pommier with f95
Use a slightly less efficient method of computing the log2() on SGI IRIX64,
in order to avoid a compiler bug when optimizations are turned on.
Tested on:
SGI IRIX64 6.5 (atlantia)
