For make installcheck, compile and run installed examples using the installed scripts. They were being compiled but not run.
Add Fortran2003 examples to the run-ex-fortran script when fortran2003 is enabled.
Set flag to -O3 in production mode for Intel compilers other than those with specified other settings.
Gentoo patches:
Remove unnecessary setting of LD_LIBRARY_PATH from configure.
Prevent potential array subscript out of bounds error in perform/pio_engine.c and sio_engine.c.
Tested with h5committest on jam, koala, ostrich and platypus, on emu and kite, and parallel tests on jam, koala and platypus with mpich built with gnu 4.8.2 and with intel compilers.
Remove all traces of MPI-POSIX VFD and GPFS detection/code.
Remove remaining traces of stream VFD.
Remove testpar/t_posix_compliant test (it's not actually verifying anything).
Clean up H5D__mpio_opt_possible() further.
Moved environment variable that disables MPI collective operations into
MPI-IO VFD (instead of it being in src/H5S.c).
A few other small code cleanups.
Tested on:
Mac OSX/64 10.9.2 (amazon) w/parallel & serial
Revert some earlier usage of strncpy, which was incorrect.
Bring Coverity changes from branch back to trunk:
r20821:
Use HDstrncpy. --gh
(Fixed already, with strdup)
r20822:
(Not merged, incorrect use of HDstrncpy())
r20823:
(Not merged, incorrect use of HDstrncpy())
r20824:
Maintenance: Bug fix: addressed CID 666.
Value stored at *expression_len should be used in the call to
HD5packFstring to avoid overflow (and unnecessary arithmetic
calculation and casting)
r20825:
Issue 642: Added check for error and handler with print to stderr and exit.
r20826:
Undo revision 20818, as that issue has already been fixed in the 1.8 branch
and trunk (but not coverity branch)
r20827:
(Not merged, incorrect use of HDstrncpy())
r20828:
Use HDstrncpy. --gh
(Corrected use of strncpy())
r20829:
Check return of H5Lget_val(print_udata->fid, path, targbuf,
linfo->u.val_size + 1, H5P_DEFAULT) and if error set trgbuf[0] to 0.
Check if H5Lunpack_elink_val(targbuf, linfo->u.val_size, NULL,
&filename, &objname) was successful and allow print. Otherwise filename
and objname are not created. (init those to NULL)
r20830:
resolved coverity issues 939, 940, 941, 944, and 947.
all were complaints about use of sprintf, and in all cases, the
buffers used were large enough for all eventualities.
Resolved issue by replacing calls to sprintf with calls
to snprintf.
r20831:
Maintenance: Addressed CID 852
Replaced sprintf with snprintf
r20832:
Purpose: Fix valgrind issues with hl/examples/ex_image2
Description:
Modified hl/examples/ex_image2 to free global "gbuf" before exit.
Tested on:
Mac OSX/64 10.9.1 (amaon) w/C++, FORTRAN & Threadsafety
(too minor to require h5committest)
Remove trailing whitespace from C/C++ source files, with the following
script:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Tested on:
Mac OS X/32 10.5.5 (amazon)
No need for h5committest, just whitespace changes...
Make H5Dopen versioned and change all internal usage to use H5Dopen2
Add simple regression test for H5Dopen1
Tested on:
FreeBSD/32 6.2 (duty) in debug mode
FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode
Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe,
in debug mode
Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN,
in production mode
Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN,
in production mode
Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN,
w/szip filter, in production mode
Mac OS X/32 10.4.10 (amazon) in debug mode
Tested platform:
Kagiso only since it is only a comment block change. If it works in one
machine, it should work in all, I hope. Still need to check the parallel
build on copper.
Code cleanup
Description:
Trim trailing whitespace in Makefile.am and C/C++ source files to make
diffing changes easier.
Platforms tested:
None necessary, whitespace only change
New feature
Description:
All datasets were 1D only before. Added -g to use 2D datasets such
that it allows more options in testing various access patterns.
Platforms tested:
heping pp.
Misc. update:
Code cleanup
Description:
Trim trailing whitespace, which is making 'diff'ing the two branches
difficult.
Solution:
Ran this script in each directory:
foreach f (*.[ch] *.cpp)
sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f
end
Platforms tested:
FreeBSD 4.11 (sleipnir)
Too minor to require h5committest
Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-)
Description:
Generally speaking, this is the "signed->unsigned" change to selections.
However, in the process of merging code back, things got stickier and stickier
until I ended up doing a big "sync the two branches up" operation. So... I
brought back all the "infrastructure" fixes from the development branch to the
release branch (which I think were actually making some improvement in
performance) as well as fixed several bugs which had been fixed in one branch,
but not the other.
I've also tagged the repository before making this checkin with the label
"before_signed_unsigned_changes".
Platforms tested:
FreeBSD 4.10 (sleipnir) w/parallel & fphdf5
FreeBSD 4.10 (sleipnir) w/threadsafe
FreeBSD 4.10 (sleipnir) w/backward compatibility
Solaris 2.7 (arabica) w/"purify options"
Solaris 2.8 (sol) w/FORTRAN & C++
AIX 5.x (copper) w/parallel & FORTRAN
IRIX64 6.5 (modi4) w/FORTRAN
Linux 2.4 (heping) w/FORTRAN & C++
Misc. update:
feature change, new feature.
Description:
Had the HDF5_PARAPREFIX default set to /tmp.
Changed it to null so that data files are created in current directory
by default.
Also added a code to print data filename used when debug level > 0.
Platforms tested:
Tested in modi4 parallel.
Misc. update:
Code cleanup
Description:
Remove the fill-value option entirely, since the 1.5.x library's default
behavior is now the same as the 1.4.x behavior and also there is no
corresponding code for implementing fill-values with the POSIX or MPI-I/O tests.
Platforms tested:
FreeBSD 4.8 (sleipnir) w/parallel
too small to need h5committest
Compatibility fix
Description:
The H5P[set|get]_fapl_mpiposix calls changed between v1.4.x and v1.5.x.
Solution:
Wrap them in the v1.4 backward compatibility #ifdefs and update tests, etc.
Platforms tested:
FreeBSD 4.8 (sleipnir) w/paralle & v1.4 compatibility
h5committest pointless
Bug Fix
Description:
When I changed the H5P{set,get}_fapl_mpiposix functions to accept
another parameter, I didn't change it in these files.
Solution:
Added the new "use_gpfs" parameter.
Platforms tested:
Modi4 (only affects the parallel stuff, so no need for full testing).
Misc. update:
Update, Bug Fix, and Feature Add
Description:
- Updated how AC_{ENABLE,WITH} help messages were being generated.
Autoconf now gives you an AC_HELP_STRING macro to use to create
them.
- Fixed the problem with Linux LFS on RedHat 7.3 machines. It wasn't
finding getdents64(), so we can't rely on that being present
anymore...
- Added GPFS detection and setting.
- Updated how compression is specified. It's no longer necessary to
test for HAVE_ZLIB_H, HAVE_LIBZ, and HAVE_COMPRESS2. The one macro
{H5_}HAVE_COMPRESSION takes care of all of these.
Solution:
Changed the check for Linux LFS from looking for getdents() to
looking at the version number of the kernel (using the uname -r
command). You can still override with the --enable-linux-lfs switch
if you really believe that your <2.4 kernel has LFS support.
Platforms tested:
Linux (2.2 and 2.4)
New Feature
Description:
Added interleaved block pattern to MPI and HDF5 access methods. Also,
changed the blocks to just use the same size as the regular blocks for I/O,
instead of a separate block size.
Platforms tested:
IRIX64 6.5 (modi4) w/parallel
Feature Add
Description:
Added support for testing only the "write" operations. Use the "-w"
or "--write-only" flags for this.
Platforms tested:
Linux (parallel) & Modi4 (parallel)
Code cleanup and new feature.
Description:
Cleaned out some old debug print statments.
Added option -B for interleaved I/O block size.
(Just parsing and sanity check is done. Real I/O implementation
is not done yet.)
Platforms tested:
eirene(pp)
Feature Addition
Description:
Added feature which prints out the parameters and the MPI_Info object
for a run for each process.
Added some functions for the GPFS system. They are ifdef'ed out right
now (well, they need to ahve the non-existant H5_HAVE_GPFS macro set)
and aren't in use just yet. But the stub functions are there.
Platforms tested:
Linux
Folded the changes made in v1.4 into v1.5.
print library version information in help page too.
Specify the nofill feature supported in v1.5 only.
Print the values of the KB, MB and GB in case a user wants to see them.
Setup a macro, H5_HAVE_NOFILL, to indicate if Dataset no fill feature
is supported. If not, --no-fill is an invalid option.
Platforms tested:
modi4
Update
Description:
Updating the source for the PIO performance tests with the current
code that's in the V1.4 branch. It includes the newest command-line
parameters.
Platforms tested:
Linux-pp
Feature
Description:
moved the routines of setting up and dumping MPI-info object to
test library so that it is avaiable for all tests too.
Platforms tested:
modi4(pp), eirene (serial)
Bug fix
Description:
Was not able to handle data size (file size) larger than 32bits.
Was using long, which is only 4 bytes big in SP, thus overflowing
into negative when trying to address 2GB or larger.
Solution:
Changed those variables involved in file size/offset calculation
to type off_t. (If a certain system/compiler has off_t defined
as 4 bytes, it can't write to file size larger than 2GB anyway.)
Note that the lseek of SP with -D_LARGE_FILE still fails for
offset larger than 2GB (works for 2GB). That has to be fixed
soon.
Platforms tested:
burrwhite (linux 2.4) and modi4 parallel.
